I have a good condition Volvo S60 driver seat, black leather, if you are interested in the driver seat replacement discussed elsewhere on the forum. I took it back out of my 2011 before selling. I also have brackets that make it a bolt in for Gen 3. Let me know if you are interested. It is heavy so local pickup would be best - I am in Southern California. This was a huge upgrade over the stock seat and made long drives so comfortable.
Here are some pics of the seat as well as the brackets to make it plug and play in a Gen 3. I’ll thrown in the resistor that goes in the airbag plug to bypass the seat airbag so you don’t get an error light as well.
Murrieta is not far! Are those seat heater controls or just the seat position controls? I legit need a new seat, need both but it shouldn't be hard to find a passenger seat and figure it out from there.
I actually lived in Murrieta when I installed this. Not far to Irvine at all. Right now it is set up so if you bring a hot wire from the battery or the power distribution block under the hood and connect to the red wire hanging out below, it will power the position controls. I always intended to bring another power wire from one of the circuits that the Prius has for a seat heater and set it up, but never got around to it.
Yes the in-seat airbag is disabled. There is some discussion about it in the forums, but there just didn’t seem a good way to mix and match Toyota and Volvo airbag systems. So that was a decision I had to make - live without the one airbag in the seat, or in my case, excruciating back pain from the stock seat. I took my chances, but obviously everyone has to make that call for themselves.
