1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gen 5 TPWS solution

Discussion in 'Gen 5 Prius Main Forum' started by Downrange, Feb 28, 2024.

  1. Downrange

    Downrange Active Member

    Joined:
    Apr 15, 2010
    365
    195
    2
    Location:
    Canada
    Vehicle:
    2024 Prius Prime
    Model:
    SE
    I'm happy to report the TPWS sensors from Tire Rack are now installed and working correctly on both my Gen 5 Priuses. For those interested, they are the "315 MHZ Tire Pressure Sensor, with Optional Black Valve Sleeve and Cap." They're only 42.00 apiece, much cheaper than the Toyota versions.

    Installing them is easier than it seems when going through the process. The pertinent manual ref is Page 522. When going through the menu, be sure to select "Settings" - "Vehicle Settings" - "TPWS Settings" - then select "Tire Set Switching" and then "Register New Valve/ID". Then select "Tire Set 1" or "Tire Set 2," whichever is pertinent (I assume Toyota has Tire Set 1 as default for the OEM wheels and sensors). It will ask if you've selected the right set, then click "Yes."

    At this point, what actually happens is not exactly what the manual says. It's a bit confusing, but the main thing is (whether or not you actually get a message saying the ID code is being performed) you need to drive above 25 mph for awhile... Don't go in reverse, not at all, so be sure you're already facing forward when you set this up. I can't tell you when it took effect, because that's not really transparent to this operation, and I started over once or twice with each car, because I wasn't sure what was happening, but, eventually the tire pressure warning light stops blinking, and goes solid, then, when they are registered, it goes out. Eureka! Call up the normal tire pressure monitor screen, and there are your readings. Hallelujah!

    Just be patient and be prepared to try several times. It almost seems to be some kind of magic, but it's just the procedure doesn't happen just like the manual says, at least in my experience. Maybe I messed up, but they did "take." Now, let's just hope it's easy to switch back to Tire Set 1 next winter.
     
  2. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    What was wrong with original TPWS sensor that required replacing them? Just wanted new wheels and tires?
     
    daisy555 likes this.
  3. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Must resist...
     
    Downrange likes this.
  4. Downrange

    Downrange Active Member

    Joined:
    Apr 15, 2010
    365
    195
    2
    Location:
    Canada
    Vehicle:
    2024 Prius Prime
    Model:
    SE
    I wasn't being very clear: I have both OEM and winter tires/wheels for both G5s.
     
  5. JJNY

    JJNY Junior Member

    Joined:
    Jan 9, 2023
    17
    7
    0
    Location:
    NY, NY
    Vehicle:
    2010 Prius
    Model:
    III
    I had one set of aftermarket tpms never really work. Had to switch out for "clones." Now they work perfectly.
     
  6. JH26036

    JH26036 Junior Member

    Joined:
    Dec 18, 2023
    37
    20
    0
    Location:
    Boston
    Vehicle:
    2024 Prius
    Model:
    Limited AWD-e
    So you just wrote down the IDs and then inserted them into the car? Or is it auto-recognizing?
     
  7. Downrange

    Downrange Active Member

    Joined:
    Apr 15, 2010
    365
    195
    2
    Location:
    Canada
    Vehicle:
    2024 Prius Prime
    Model:
    SE
    You just select tire set one or two. The computer searches for and registers the ID numbers and wheel position.
     
  8. JH26036

    JH26036 Junior Member

    Joined:
    Dec 18, 2023
    37
    20
    0
    Location:
    Boston
    Vehicle:
    2024 Prius
    Model:
    Limited AWD-e
    Oh okay, it is automatically doing it. That's pretty cool. Thanks.
     
  9. Zeromus

    Zeromus Active Member

    Joined:
    Oct 21, 2023
    438
    220
    4
    Location:
    Ottawa Canada
    Vehicle:
    2024 Prius Prime
    Model:
    SE
    Mine didn't work with the aftermarkets at first because the stalks weren't programmed correctly to be read by the car. But once they were reset they work a dream.