1. Attachments are working again! Check out this thread for more details and to report any other bugs.

UltraGauge MX v1.4

Discussion in 'Gen 3 Prius Accessories and Modifications' started by 462disco, Jan 18, 2024.

  1. 462disco

    462disco Junior Member

    Joined:
    Apr 5, 2023
    17
    9
    2
    Location:
    Socal
    Vehicle:
    2013 Prius
    Model:
    N/A
    Didn't see a recent thread in the last few years, so decided to create a new one.

    Picked up an UltraGauge MX v1.4, with gen 3 specific programming. In addition to all the standard OBD2 gauges, it supports a few extra ones including battery SOC, Amps, battery intake temp, etc. Some parameters are frivolous, but some are definitely useful.

    Just installed mine and have not played with it much, but it's a nifty little tool. Going to set mine up to monitor coolant temp, RPM, oil temps, and maybe a few more.

    Gen 3 specific parameters, and UG mounted below.

    [​IMG]
    [​IMG]

    [​IMG]
     
    #1 462disco, Jan 18, 2024
  2. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    1,105
    410
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    A Gen 3 Prius does not have an oil temperature sensor, so you can not display it.
    FYI, the car also does not have an oil pressure sensor.
     
    #2 Brian1954, Jan 18, 2024
    Last edited: Jan 18, 2024
    462disco likes this.
  3. black_jmyntrn

    black_jmyntrn Senior Member

    Joined:
    Oct 23, 2020
    1,374
    350
    3
    Location:
    Los Angeles, CA
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Advanced
    Im curious if it'll read TPMS PSI of each tire like inTechstream or using my OBD2 dongle.
     
    #3 black_jmyntrn, Jan 19, 2024
  4. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,419
    3,409
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    ??? Then what is that oil pressure switch that leaks on the rear passenger side of the
    engine? It's just above or to the side of the timing chain tensioner and looks like there
    is an oil passage there. How does the computer know if you have oil presser or not?


     
    #4 ASRDogman, Jan 19, 2024
    Mendel Leisk likes this.
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,664
    39,220
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    And when the oil warning light comes on, I believe that’s due to low oil pressure?
     
    #5 Mendel Leisk, Jan 19, 2024
  6. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    1,105
    410
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    I should have said that the car does not have an oil pressure transducer, which transmits the oil pressure to the ECM. It does have the oil pressure switch, which will send a signal to the ECM for low oil pressure. Sorry for the confusion.
     
    #6 Brian1954, Jan 19, 2024
    Last edited: Jan 19, 2024
    ASRDogman and Mendel Leisk like this.
  7. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,419
    3,409
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    I believe I missread that. You said "oil Temerature" not "oil Pressure"..... Sorry...

     
    #7 ASRDogman, Jan 20, 2024
  8. Brian1954

    Brian1954 Senior Member

    Joined:
    Jan 31, 2021
    1,105
    410
    0
    Location:
    South Central PA, USA
    Vehicle:
    2011 Prius
    Model:
    III
    In the second sentence, I did say oil pressure. So you did not missread what I wrote.
     
    #8 Brian1954, Jan 20, 2024
    ASRDogman likes this.
  9. AzusaPrius

    AzusaPrius Senior Member

    Joined:
    May 27, 2020
    2,069
    868
    0
    Location:
    California
    Vehicle:
    2010 Prius
    Model:
    IV
    How fast was the shipping, did they respond quickly?

    Their website seems very dated and there is no contact information.

    What payment options do they take?

    Any update on your use of this product?
     
    #9 AzusaPrius, Jan 20, 2024
  10. AzusaPrius

    AzusaPrius Senior Member

    Joined:
    May 27, 2020
    2,069
    868
    0
    Location:
    California
    Vehicle:
    2010 Prius
    Model:
    IV
    How fast was the shipping, did they respond quickly?

    Their website seems very dated and there is no contact information.

    What payment options do they take?

    Any update on your use of this product?
     
    #10 AzusaPrius, Jan 20, 2024
  11. 462disco

    462disco Junior Member

    Joined:
    Apr 5, 2023
    17
    9
    2
    Location:
    Socal
    Vehicle:
    2013 Prius
    Model:
    N/A
    You may be able to. The MX version states you can program multiple gauges in the unit, you just have to have the manufacturer code to do it. Apparently Scangauge XGauge parameters can be made to work in the UG, and their list for the Gen 3 specific is pretty big. » TOYOTA – LEXUS – SCION Scroll about 2/3 down. Listed manufacturer codes include traction battery temp, inverter coolant temp, tire pressures and tire temps (I believe the factory sensors support this but have not confirmed).

    UG doesn't do much advertising, it's pretty much all word of mouth. There's a few platforms that the UG is popular with - a bunch of Land Cruiser and Tacoma guys run these.
    Payment was via PayPal, shipped out 2 days after I purchased via USPS. Going to be playing with it more tomorrow and trying to program those extra parameters in.. stay tuned.
     
    #11 462disco, Jan 21, 2024
  12. V Sport Wagon

    V Sport Wagon Active Member

    Joined:
    Oct 6, 2023
    345
    113
    0
    Location:
    Southern California
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    The distance to empty display on these and gallons in tank doesn't seem to be accurate at all on mine. Hybrid Assistant APP actually is pretty good with those.
     
    #12 V Sport Wagon, Jan 21, 2024
(You must log in or sign up to post here.)