1. Attachments are working again! Check out this thread for more details and to report any other bugs.

How to rev the engine

Discussion in 'Gen 3 Prius Technical Discussion' started by fluffypony, Sep 25, 2023.

  1. fluffypony

    fluffypony New Member

    Joined:
    Sep 25, 2023
    2
    0
    0
    Location:
    Los angeles
    Vehicle:
    2010 Prius
    Model:
    Three
    I was told by a mechanic that I needed to replace the Mass Airflow Sensor. Afterwards the engine spotters to a stop every time I try starting it I mechanic mentioned I need to put it in park and rev the engine continuously for 15 minutes for it to learn the new airflow.
    I was wondering how to rev the engine?
    I have a GEN three 2010
     
    #1 fluffypony, Sep 25, 2023
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Just disconnect the 12v battery for 10 seconds and reconnect. You may have to clean your throttle body too
     
    #2 JC91006, Sep 25, 2023
    Brian1954 likes this.
  3. StarCaller

    StarCaller Senior Member

    Joined:
    Feb 15, 2014
    1,257
    706
    0
    Location:
    Cedar Crest, NM, USA
    Vehicle:
    2014 Prius
    Model:
    Two
    or try this driving pattern here which got first posted by @Elektroingenieur & got mentioned a few times by @ChapmanF /
    it finally made the dtc disappear after I forgot to plug in the maf plug while cleaning the egr.
    " During normal driving, increase the vehicle speed to 50 mph (80 km/h).
    Depress the accelerator pedal fully to increase the vehicle speed to between 62 and 75 mph (100 and 120 km/h) (engine speed of 4000 rpm or more) and then maintain the speed for at least 5 seconds."

    permanent P0102 readiness monitor stuck "incomplete" | PriusChat
     
    #3 StarCaller, Sep 25, 2023
  4. sam spade 2

    sam spade 2 Senior Member

    Joined:
    Mar 31, 2018
    7,035
    2,790
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    SOME of you need to read the original post a little more carefully.

    And I think that this so called "mechanic" if full of crap.
     
    #4 sam spade 2, Sep 26, 2023
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,689
    39,236
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Do you still have the original MAF sensor?

    What’s the miles on it?

    How soon after start up does it sputter to a stop? A few seconds? If so it’s not really running; that’s just the hybrid system spinning it (and getting discharged).

    I’d second your current mechanic being a big part of the problem.
     
    #5 Mendel Leisk, Sep 26, 2023
(You must log in or sign up to post here.)