1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Gen2 ABS actuator replacement

Discussion in 'Gen 2 Prius Main Forum' started by GYC, May 12, 2023.

  1. GYC

    GYC Junior Member

    Joined:
    Sep 25, 2017
    3
    1
    0
    Location:
    NC
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    I just replaced the ABS actuator with a good used one. Triangle warning w/!, brake, ABS appeared on the screen. I wouldn’t found any helpful to troubleshoot it. It turned out the rear orange plugs were not pushed in all the way. Fix it!
     
    #1 GYC, May 12, 2023
  2. Tombukt2

    Tombukt2 Senior Member

    Joined:
    Nov 29, 2020
    10,384
    1,794
    0
    Location:
    Durham NC
    Vehicle:
    2009 Prius
    Model:
    Base
    So now you're good and codes are gone or?
     
    #2 Tombukt2, May 12, 2023
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The helpful way to troubleshoot it would have been to read the trouble codes from the car. There would have been P0A0D, which tells you your orange plugs are not pushed in all the way, and you would have immediately known what was needed.
     
    #3 ChapmanF, May 12, 2023
(You must log in or sign up to post here.)