1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2008 Prius - P0A72 and C1310

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Todd Wallace, May 9, 2023.

  1. Todd Wallace

    Todd Wallace Junior Member

    Joined:
    Sep 27, 2016
    19
    0
    0
    Location:
    Chatham NC
    Vehicle:
    2015 Prius
    Model:
    Four
    Hello folks - I'm helping some friends with their 2008 Prius. They left a door open overnight and drained the 12v battery. It was completely dead in the morning. They jumped off the dead battery with a running RAV4 with jumper cables. On restart with a charged 12v battery error lights popped up and green car symbol changed to limp mode. Red triangle, brake with exclamation, VSC, and check engine lights on. Engine won't start. Put OBD2 scanner on and got P0A72 and C1310 codes. I checked all the fuses - all good. I swapped all the relays in the fuse box - no change. I disconnected the 12v battery to reset and the car started and all looked normal - the 12v battery was charging correctly and the hybrid battery was charging correctly with no warning lights. I shut the car off and restarted it. Warning lights now back on with P0A72 and C1310 coming up again and car in limp mode. Does this sound familiar to anyone? I don't have access to sub codes at this time, just hoping someone has been through this and can point me to the fix. Thanks for any responses....
     
  2. ColoradoCrow

    ColoradoCrow Active Member

    Joined:
    Sep 2, 2019
    980
    398
    1
    Location:
    Leawood, KS
    Vehicle:
    2008 Prius
    Model:
    I
    Disconnecting the 12V battery can reset the codes....However It takes the car a long, long time to recharge the 12volt battery it is NOT like a regular ICE car. Like let it idle for 4 hours IIRC. Do you have a slow trickle smart charger? I would get one and hook up to that overnight. Also if the 12v battery is more than 4 years old it might not recover. Have it tested at the auto parts store. Maybe they can provide a slow charging service for you. If the battery is toast. it's about $200 to replace. But then your good for quite awhile.
     
  3. Todd Wallace

    Todd Wallace Junior Member

    Joined:
    Sep 27, 2016
    19
    0
    0
    Location:
    Chatham NC
    Vehicle:
    2015 Prius
    Model:
    Four
    I had replaced the dead battery with a fresh 12v battery first thing. .
     
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The C1310 code is just there because of the P0A72. In the repair manual, the troubleshooting steps for P0A72 will be the important ones.
     
    ColoradoCrow and Todd Wallace like this.
  5. Todd Wallace

    Todd Wallace Junior Member

    Joined:
    Sep 27, 2016
    19
    0
    0
    Location:
    Chatham NC
    Vehicle:
    2015 Prius
    Model:
    Four
    All the sub codes for P0A72 point to there being a fault in the Inverter or wire harness. Before replacing the inverter, is there another possible solution that anyone has figured out for the P0A72 code? Again, this is related to an electrical short when jumping a completely dead 12v battery with jumper cables from a running car.
     
  6. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    When there's a choice like that, the rest of the troubleshooting steps will have you figure out which it is, so then you fix that.
     
  7. Todd Wallace

    Todd Wallace Junior Member

    Joined:
    Sep 27, 2016
    19
    0
    0
    Location:
    Chatham NC
    Vehicle:
    2015 Prius
    Model:
    Four
    I have familiarity with the Prius - sometimes the trouble codes lead you to a "rabbit hole". The P0A72 not being a common problem ... just looking for successful alternatives that others may have found...
     
  8. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Naturally, the more common issues are the ones it's most likely there'll be crowdsourced solutions to. For the less common ones, sometimes there's not much more to go on than learning what conditions cause that code to be set (the "detection condition" shown in the manual), then finding out what caused those conditions in this car at this time.

    One certainly does sometimes see people with a trouble code be led into a rabbit hole ... by not approaching it that way.
     
  9. Todd Wallace

    Todd Wallace Junior Member

    Joined:
    Sep 27, 2016
    19
    0
    0
    Location:
    Chatham NC
    Vehicle:
    2015 Prius
    Model:
    Four
    UPDATE: We did more testing - swapped out all relays - no luck. My friends had plans and went ahead and vacationed at the shore for a week. When they returned and started the Prius, all error codes disappeared and have been driving the car with no troubles ... go figure. :)