1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Hybrid Battery sluggish in mornings

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Jeff Stevens, Mar 6, 2023.

  1. Jeff Stevens

    Jeff Stevens New Member

    Joined:
    Nov 14, 2022
    5
    1
    1
    Location:
    Florida
    Vehicle:
    2009 Prius
    Model:
    N/A
    I've been having an intermittent problem for several months and am trying to determine if it could be caused by anything other than the hybrid battery.
    • When I leave the car int he evening, the MFD shows four-five bars for the hybrid battery
    • In the morning, this will either drop to one bar immediately, or within several minutes after driving. In the latter case, I will get the red triangle warning. If I pull tot he side of the road and wait about five minutes to restart the car, no warning go off and the car returns to four-five bars
    • Sometimes when driving, I'll get the Brake Light, ABS Light, Check Engine & Traction Control Lights at once. Again, these will go off once I stop and restart the car.
    • I've run OBD codes and do not get any codes or warnings for the hybrid battery - only a poor engine performance code.
    The Prius has not had any hybrid battery battery work done before - close to 193k miles. Brake actuator replaced in 2020.
     
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,130
    50,046
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    You need a Prius aware scanner.

    there’s a thread here for that.

    your battery needs to be replaced’ or if you’re lucky, it’s just corrosion inside the case.

    is the cooling fan clean and running?
     
  3. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,302
    4,241
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Generally, if you have warning lights being displayed, you'll have related OBD2 codes stored in the ECUs (computers), find a better scanner?
    Always best to let the vehicle warm up before moving; on a cold start up it shouldn't take but a minute or two and the engine will turn off.

    You might try using a "grid charger" on the existing HV battery, either a simple "top balance", or a "reconditioning" by cycling it a few times.
    Have you tried going step by step through the workup for that poor engine performance code?

    Here is the step by step work up for DTC P3190 : https://attachments.priuschat.com/attachment-files/2019/10/176519_DTC_P3190_P3191_P3193.pdf

    FYI : you're moderated until you've posted 5 times.
     
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,667
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Try Dr Prius app? Works well with the Carista bluetooth OBD adapter. Just the static test will give you some idea how the internal cells are, their levels, and how balanced they are.
     
  5. sam spade 2

    sam spade 2 Senior Member

    Joined:
    Mar 31, 2018
    7,035
    2,790
    0
    Location:
    USA
    Vehicle:
    2017 Prius c
    Model:
    Four
    Sure. Several things. Corrosion on the battery bus bars and a bad connection somewhere in the HV system maybe.

    BUT.....before you spend a lot of time and money chasing ghosts........
    Check your 12 V battery and it's connections; the main cables at BOTH ends.
    If it is over 5 years old, just replace it.

    How many minutes a day do you guess that the car normally is in use ?
     
  6. Jeff Stevens

    Jeff Stevens New Member

    Joined:
    Nov 14, 2022
    5
    1
    1
    Location:
    Florida
    Vehicle:
    2009 Prius
    Model:
    N/A
    About an hour, tops.
     
  7. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,130
    50,046
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    it's all about the correct codes man, you're dealing with a dozen ecu's here.