1. Attachments are working again! Check out this thread for more details and to report any other bugs.

C1202 while brake fluid reservoir is full

Discussion in 'Generation 1 Prius Discussion' started by Timg1, Sep 20, 2022.

  1. Timg1

    Timg1 New Member

    Joined:
    Aug 28, 2022
    13
    3
    0
    Location:
    New York
    Vehicle:
    2003 Prius
    Model:
    Base
    I’m wondering what the problem might be. The reservoir is full to the max line with brake fluid. Drove around a bit and stayed at the same level, brake warning light is on, but I’m not entirely sure what’s causing the c1202 to come on. I also have code c1259.
     
    #1 Timg1, Sep 20, 2022
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Needs to be bled?
     
    #2 bisco, Sep 20, 2022
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,904
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    The repair manual says C1202 means one of these three things happened:

    • The ignition switch was ON and the fluid level switch circuit appeared open for two seconds or more.
    • The car was driven faster than 3 MPH* and the fluid level was indicated low for 10 seconds or more.
    • The car was stopped and the level was indicated low for 5 seconds or more.

    Next step is to break out a meter and look for a reason for one of those things happening. A couple pages of suggestions can be found in the repair manual, but they're pretty straightforward.

    * it really says "3 km/h (5 mph)", which is clearly backwards; the higher number has to be the km/h
     
    #3 ChapmanF, Sep 20, 2022
  4. Timg1

    Timg1 New Member

    Joined:
    Aug 28, 2022
    13
    3
    0
    Location:
    New York
    Vehicle:
    2003 Prius
    Model:
    Base
    I'm gonna take this car to the dealer and find out more of what it is, have to fix the drive belt and clutch pulley. Thanks for all the diagnostic help so far.
     
    #4 Timg1, Sep 23, 2022
  5. Josey

    Josey Active Member

    Joined:
    Jun 10, 2019
    290
    111
    0
    Location:
    Virginia
    Vehicle:
    2003 Prius
    Model:
    One
    I would not go to a dealer. Ask around the area where you live. They is very likely a locally owned independent shop that will have expertise on hybrids and Prius in particular. You will very likely get far better service at much lower cost.
     
    #5 Josey, Sep 23, 2022
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Anywhere near South Main Auto? (just google that with "address" at the end)
     
    #6 Mendel Leisk, Sep 23, 2022
  7. Timg1

    Timg1 New Member

    Joined:
    Aug 28, 2022
    13
    3
    0
    Location:
    New York
    Vehicle:
    2003 Prius
    Model:
    Base
    If you're talking about south main auto LLC, which has the YouTube channel, I am around 4 hours and 30 minutes away from them unfortunately. I have yet to take the car anywhere because, tomorrow I will fix the A/C clutch, and get a new belt, as I just realized, the car does not have a drive belt! If anybody knows any decent mechanic in NY, specifically in the city/Brooklyn, please let me know.
     
    #7 Timg1, Sep 26, 2022
    Mendel Leisk likes this.
  8. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,904
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Wait, are you saying you have a Gen 1 and the belt is gone?

    Yikes. Yes, get a belt. It drives the engine cooling water pump, not just the A/C.
     
    #8 ChapmanF, Sep 26, 2022
    Josey likes this.
(You must log in or sign up to post here.)