1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Side mirror movement problem

Discussion in 'Prius v Main Forum' started by nepritch, Sep 18, 2022.

Tags:
  1. nepritch

    nepritch New Member

    Joined:
    Sep 18, 2022
    3
    0
    0
    Location:
    Lacey, Washington
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Our 2012 Prius v is having a problem with side mirror movement (both driver and passenger) where they will each move left or up, but they will not move down nor right. Any suggestions as to what's broken?

    So far I have verified no fuses have blown. Have also pulled the switch out of the door and did some preliminary checks with a voltmeter and continuity tester, but with out specs on the switch or a circuit diagram, it's hard to know what I should be looking for there. Have not pulled the door panels to verify power to the mirrors themselves -- hoping I can avoid needing to go that far.

    --Norm
     
    #1 nepritch, Sep 18, 2022
  2. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,488
    5,055
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Almost has to be the switch since its the same switch operating both mirrors and your symptoms are identical for both mirrors. This system seems to be hardwired, eg no computer control, directly from the switch to the motors.

    I would try to get a used oem switch off ebay or price new at the dealer or aftermarket. Toyota 84872-52030

    Amazon Dorman Switch


    Ebay Used
    https://ebay.to/3BO1yWW

    A priuschat users wiring diagram

    D0C8129F-98EE-4597-B69E-7EAF17CE8FF4.png
     
    #2 rjparker, Sep 19, 2022
    Last edited: Sep 19, 2022
    Air_Boss likes this.
  3. nepritch

    nepritch New Member

    Joined:
    Sep 18, 2022
    3
    0
    0
    Location:
    Lacey, Washington
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Thank you for the diagram! I tend to agree with your assessment.

    The thing that was getting me, is I figured most failure modes in the switch would result in total loss of control of one or both axis (e.g. up/down, left/right, or both). Losing control of half of two axis (down and right) seems pretty weird.

    --Norm
     
    #3 nepritch, Sep 19, 2022
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,904
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    But as you see, the difference between up and down, or between left and right, is a matter of applying different polarity to the same motor, and therefore there are separate switch contacts for down and for up, and for left and for right.
     
    #4 ChapmanF, Sep 19, 2022
    Air_Boss likes this.
  5. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,036
    1,110
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    Switch or connector has failed.
     
    #5 Air_Boss, Sep 19, 2022
  6. nepritch

    nepritch New Member

    Joined:
    Sep 18, 2022
    3
    0
    0
    Location:
    Lacey, Washington
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Indeed, this rules out the motors and the wiring, leaving only the switch which surely must be what's broken. With that, I currently have a replacement on order and will have it in hand soon.

    What I find weird though, without knowing the internals of the switch, I cannot find a single point of failure in the switch that would account for the symptoms. I've traced the diagram rjparker kindly provided, and it looks like the simultaneous failure of two different switch contacts would certainly do it. In my years of troubleshooting techy things, multiple simultaneous failures is unusual. It means either there's more to the switch that I don't get yet, or something else interesting is going on. After I replace the switch, I'll crack it open to see if I can tell what it was.

    --Norm
     
    #6 nepritch, Sep 19, 2022
  7. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,488
    5,055
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    It really means some mechanical linkage in the switch has failed. Rather common.
     
    #7 rjparker, Sep 19, 2022
  8. ColoradoBoo

    ColoradoBoo Senior Member

    Joined:
    Jul 19, 2019
    1,042
    682
    4
    Location:
    Monument, Colorado USA
    Vehicle:
    2017 Prius
    Model:
    Two
    If one side works but not the other, swap out that switch. If the old one works on the new side you know that's not the problem...could be the sender unit on the dash or even a wire got cut or moved or crimped. I hate troubleshooting electrical problems!!
     
    #8 ColoradoBoo, Sep 19, 2022
  9. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,904
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    When I bought my 2010, the side mirrors were completely dead. The seller looked astonished. I bought the car anyway, opened up the switch, and went at all the contacts with GC Jiffy Bath, and it's been ok ever since.

    Oxidation is a process that can have its way with multiple switch contacts simultaneously, or nearly so.

    Full disclosure: Toyota has a TSB where they strongly discourage attempts to open or clean switches, and recommend only replacing them, for fear of fire hazard. Working on a switch as I did would be at your own risk.
     
    #9 ChapmanF, Sep 19, 2022
(You must log in or sign up to post here.)