1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Anyone know what this strange clicking noise under the dash is?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by thetuningspoon, Apr 14, 2022.

  1. thetuningspoon

    thetuningspoon Junior Member

    Joined:
    Jan 20, 2018
    30
    22
    0
    Location:
    Connecticut
    Vehicle:
    2008 Prius
    Model:
    N/A
    Does anyone know what this noise is? I only seem to hear it during warmer months, particularly when I'm running the A/C. But in this video I'm not running the A/C and the ICE is not running either, but you can still hear the sound. This is an '08 model.

    I took this video from under the dash near the gas/brake pedals.


     
    #1 thetuningspoon, Apr 14, 2022
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,235
    50,090
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    maybe an hvac vent door kind of stuck?
     
    #2 bisco, Apr 14, 2022
  3. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,937
    16,243
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    See this thread:

    No, that wasn't a mouse in the heater | PriusChat

    It isn't that a door is 'stuck', it is that the door's position sensor is sending noisy data, which makes the ECU keep moving the door around trying to hold the 'same' position.

    Because you have a Gen 2, be sure to read that thread down to post #13 about yitznewton solving the problem of more difficult access in Gen 2.
     
    #3 ChapmanF, Apr 14, 2022
    thetuningspoon likes this.
  4. thetuningspoon

    thetuningspoon Junior Member

    Joined:
    Jan 20, 2018
    30
    22
    0
    Location:
    Connecticut
    Vehicle:
    2008 Prius
    Model:
    N/A
    Thanks @ChapmanF, that looks like my issue!
     
    #4 thetuningspoon, Apr 30, 2022
  5. thetuningspoon

    thetuningspoon Junior Member

    Joined:
    Jan 20, 2018
    30
    22
    0
    Location:
    Connecticut
    Vehicle:
    2008 Prius
    Model:
    N/A
    Turns out that the part I need fixed is actually the actuator above the one discussed in that thread, which is even harder to get at. Here is the thread discussing that one: Blower won't go to defrost | PriusChat

    They appear to me to be the same part with a different arm (?)

    Of course I didn't realize this until after I had pulled out and attempted to repair the lower actuator. Now I broke it and have no more A/C :-(

    I just ordered a couple of the Santech equivalents of this part, which are much cheaper than the OEM. Hopefully I can at least replace the one I broke until I work up the courage to pull apart the dashboard. https://www.autozone.com/cooling-heating-and-climate-control/a-c-heater-blend-door-actuator/p/santech-a-c-heater-blend-door-actuator-mt18625/558331_0_0
     
    #5 thetuningspoon, May 17, 2022
    bisco likes this.
  6. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,937
    16,243
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Attempted to repair how, and broke, how? They're somewhat forgiving little gizmos....
     
    #6 ChapmanF, May 17, 2022
  7. thetuningspoon

    thetuningspoon Junior Member

    Joined:
    Jan 20, 2018
    30
    22
    0
    Location:
    Connecticut
    Vehicle:
    2008 Prius
    Model:
    N/A
    I opened it up, removed the big gear, and sprayed it with contact enhancer. I marked the position with a sharpie so I'm sure I got it back where it should be, but In the meantime the motor dropped out onto the floor and I don't know if I got it back in the proper position or not. I didn't realize it was loose like that. When I make adjustments to the heat/ac temp control I don't see or hear it doing anything now.
     
    #7 thetuningspoon, May 17, 2022
  8. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,937
    16,243
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Probably recoverable. :) As you've already ordered a replacement, maybe resurrecting the old one can be a relaxing puzzle for later.
     
    #8 ChapmanF, May 17, 2022
    thetuningspoon likes this.
  9. thetuningspoon

    thetuningspoon Junior Member

    Joined:
    Jan 20, 2018
    30
    22
    0
    Location:
    Connecticut
    Vehicle:
    2008 Prius
    Model:
    N/A
    @ChapmanF Can you confirm whether both actuators on the left side of the dash are the same part (minus the arm)?
     
    #9 thetuningspoon, May 17, 2022
  10. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,937
    16,243
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I know nothink, nothink.
     
    #10 ChapmanF, May 18, 2022
  11. thetuningspoon

    thetuningspoon Junior Member

    Joined:
    Jan 20, 2018
    30
    22
    0
    Location:
    Connecticut
    Vehicle:
    2008 Prius
    Model:
    N/A
    Well, the Santech part does not fit. The white nub that the arm attaches to is on the opposite side of the unit :( AutoZone's website lied to me :mad:

    I found some used ones on eBay and will hope for the best.
     
    #11 thetuningspoon, May 18, 2022
(You must log in or sign up to post here.)