Has anyone done a bore scope?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Isaac Zachary, Mar 16, 2022.

  1. Isaac Zachary

    Isaac Zachary Senior Member

    Joined:
    Jan 20, 2018
    2,223
    1,066
    1
    Location:
    USA
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I want to get rid of the oil burning on my Prius. After the PCV valve and with over 200,000 miles I believe the most likely cause is piston rings gummed up. But that could lead to cylinder wall damage. I'd like to see if the cylinder walls are ok before ordering just a set of pistons. A $2,000 engine block would be quite a bit jump, but that would be correct step if the cylinder walls are toast.

    I want to get a simple borescope and see what the walls look like without removing the heads. Has anyone else done this? Any suggestions on what tiny camera on a flexy stick to get?
     
    #1 Isaac Zachary, Mar 16, 2022
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,600
    8,478
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Here in this video has a camera for $139.00

    This video here has a good cheap device to take a look at the cylinders

     
    #2 JC91006, Mar 16, 2022
    Isaac Zachary likes this.
  3. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,827
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Rings have failed from crappy oil.

    Many a used G2 engine replaced on this forum from this very issue. Used G2 engines are plentiful and fairly cheap. Check local bone yards
    and ebay has many from $300 to $700.

    More members will come along with other outlets.

    Use the search forums link up top and search:

    engine replacement
     
    #3 edthefox5, Mar 17, 2022
    Isaac Zachary likes this.
(You must log in or sign up to post here.)