1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Camshaft timing gear

Discussion in 'Gen 2 Prius Technical Discussion' started by prius-07, Feb 9, 2022.

Tags:
  1. prius-07

    prius-07 Junior Member

    Joined:
    Feb 2, 2022
    6
    1
    0
    Location:
    california
    Vehicle:
    2007 Prius
    Model:
    Base
    I got a newer engine for my 07 Prius and took it apart to replace a head gasket, timing chain, etc. My question is, when installing g then intake camshaft back, I notice that the camshaft timing gear rotates left and right. First, is that normal? Second, should I install with the gear rotated all the way clockwise or counterclockwise? I did not take the timing gear apart.
     
    #1 prius-07, Feb 9, 2022
    SFO likes this.
  2. mr_guy_mann

    mr_guy_mann Senior Member

    Joined:
    Sep 3, 2020
    3,668
    1,715
    0
    Location:
    NJ-USA
    Vehicle:
    2006 Prius
    Model:
    Four
    IF you didn't remove the VVT actuator / chain sprocket from the intake cam, then you should be able to just line up the colored links on the timing chain with the marks on the sprockets during assembly. You really need to follow the procedure in the service manual.

    AFAIK, if you hold the camshaft and turn the sprocket clockwise, it should lock when it gets to its "home" position. At least that's what generic VVT instructional documentation states- haven't gone inside a Prius engine before (but have never heard about a non-locking VVT actuator either).

    Question- why did you pull it apart for the chain and head gasket? The Gen2 really isn't known for problems with either of those things.

    Posted via the PriusChat mobile app.
     
    #2 mr_guy_mann, Feb 11, 2022
    Last edited: Feb 11, 2022
    prius-07 likes this.
  3. prius-07

    prius-07 Junior Member

    Joined:
    Feb 2, 2022
    6
    1
    0
    Location:
    california
    Vehicle:
    2007 Prius
    Model:
    Base
     
    #3 prius-07, Feb 14, 2022
  4. prius-07

    prius-07 Junior Member

    Joined:
    Feb 2, 2022
    6
    1
    0
    Location:
    california
    Vehicle:
    2007 Prius
    Model:
    Base

    So I finished the job. This Prius camshaft timing gear does not have a locking pin, as shown in the repair manual. It doesn't have a spring for the lock pin, either. All you need to do is make sure when installing the timing gear you rotate it all the way to the most retarded position (clockwise) and install the chain. You will see two dots in the timing gear, one on the plate and one just above the center bolt; just align both of them.
     

    Attached Files:

    #4 prius-07, Feb 22, 2022
  5. Lubrico

    Lubrico New Member

    Joined:
    Jul 17, 2024
    13
    0
    0
    Location:
    Pakistan
    Vehicle:
    2007 Prius
    Model:
    II
    R u sure there is no locking system in prius gen 2 phaser. Cause I have changed mine with lock type ans still I get p0012
     
    #5 Lubrico, Aug 9, 2024
(You must log in or sign up to post here.)