1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Multifunction display went black and not responding at all, car drives fine though

Discussion in 'Gen 2 Prius Main Forum' started by Patka, Nov 22, 2017.

  1. Patka

    Patka New Member

    Joined:
    Jun 3, 2017
    13
    2
    0
    Location:
    Buford, GA
    Vehicle:
    2009 Prius
    Model:
    II
    I have a 2009 Prius, driving fine at this time. Yesterday the multifunction display just died. There is nothing visible on the screen and also no reaction or sound when I click the buttons around the display such as climate. Luckily, the A/C still works and the steering wheel controls seem to work as well, so I can still use the car comfortably. Does anyone have an idea about what might be the problem and how to fix it?
     
  2. Dxta

    Dxta Senior Member

    Joined:
    Nov 7, 2016
    1,932
    767
    0
    Location:
    Lagos
    Vehicle:
    2008 Prius
    Model:
    II
    I think your MFD is faulty. There's a TBS, or so, on that.

    There's someone on PC that does repair that dammed thing, and bring it back to life
     
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    could be a loose connection in back i suppose.
     
    Patka likes this.
  4. TheLastMojojomo

    TheLastMojojomo Active Member

    Joined:
    Sep 14, 2016
    232
    177
    0
    Location:
    US
    Vehicle:
    2009 Prius
    Model:
    Touring
    Check the ECU-B fuse under the steering wheel.
    If it's blown the MFD will be black and unresponsive. Mine has an add-a-fuse attached for my dash cam.

    2017-11-22%2015.37.54.jpg

    Posted via the PriusChat mobile app.
     
    #4 TheLastMojojomo, Nov 22, 2017
    Last edited: Nov 22, 2017
  5. TheLastMojojomo

    TheLastMojojomo Active Member

    Joined:
    Sep 14, 2016
    232
    177
    0
    Location:
    US
    Vehicle:
    2009 Prius
    Model:
    Touring
  6. Patka

    Patka New Member

    Joined:
    Jun 3, 2017
    13
    2
    0
    Location:
    Buford, GA
    Vehicle:
    2009 Prius
    Model:
    II
    Thank you, I will check it tomorrow when there is light, but looking at the manual, it says that the ECU-B includes power windows and A/C as well and the windows do work, could they still work if the fuse is blown?
     
  7. TheLastMojojomo

    TheLastMojojomo Active Member

    Joined:
    Sep 14, 2016
    232
    177
    0
    Location:
    US
    Vehicle:
    2009 Prius
    Model:
    Touring
    Interesting that it says that because I just went and tested what the manual says by unplugging the ECU-B fuse. Power windows and A/C both worked but the MFD did not. I wonder if there's a larger ECU fuse it might be talking about in the engine compartment. I really don't know though.

    Posted via the PriusChat mobile app.
     
  8. Patka

    Patka New Member

    Joined:
    Jun 3, 2017
    13
    2
    0
    Location:
    Buford, GA
    Vehicle:
    2009 Prius
    Model:
    II
    Oh, good, that gives me hope! I will be in touch with what I find soon!
     
  9. Patka

    Patka New Member

    Joined:
    Jun 3, 2017
    13
    2
    0
    Location:
    Buford, GA
    Vehicle:
    2009 Prius
    Model:
    II
    I have removed and checked the fuse. The wire inside is not broken, but I guess the fuse can still be bad. I will take it to the some Auto store and see if they can check it for me. Thank you for the tip!
     
  10. joe@gornikad.com

    [email protected] Junior Member

    Joined:
    Apr 7, 2012
    3
    3
    0
    Vehicle:
    2009 Prius
    Model:
    N/A
    Auto Be Yours is the company that fixes MFD's. 812-752-5050.
    Steve is the guy who owns the company and fixed mine in my 2009. I had the exact same problem. Drove with a black screen for 9 months. Steve fixed in less than 90 min. Awesome service, great people. 12 month warranty.
     
    bisco likes this.
  11. Patka

    Patka New Member

    Joined:
    Jun 3, 2017
    13
    2
    0
    Location:
    Buford, GA
    Vehicle:
    2009 Prius
    Model:
    II
    Reporting back on the Multifunction Display. This does not appear to be a fuse problem. The display came back on for some hours only to fade out again while driving leaving the buttons also unresponsive. Since then it has come back up for a brief moment a few times, fading out into a white line or the Toyota logo which stayed for a whole drive. Does anyone have an idea or experience based on these symptoms about what could be the issue? Thank you so much!
     
  12. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    sounds like a bad solder joint or similar.
     
    Patka likes this.
  13. Trevor

    Trevor Member

    Joined:
    Jul 5, 2004
    352
    8
    0
    Location:
    Staten Island, NY
    Vehicle:
    2006 Prius
    Model:
    N/A
    Years ago the touchscreen on my 2006 got unresponsive. I bought a used one from ebay and used a guide that someone created for getting the MFD out. It wasn't super hard but it was painstaking because of the way all the parts of the dashboard interlock. Vents holding down the MFD, panels next to vents holding down the vents.
     
  14. AnneLW

    AnneLW Member

    Joined:
    Apr 23, 2017
    118
    95
    0
    Location:
    California desert
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    This happened to us at about 160,000 miles. Needed a new unit. Toyota replaced it and then retroactively added it to the warranty and reimbursed us. Check with a dealer.
     
  15. coyotesafteru

    coyotesafteru Junior Member

    Joined:
    Mar 25, 2017
    13
    9
    0
    Location:
    California
    Vehicle:
    2007 Prius
    Model:
    Five
    Please help !
    I have a 2007 Gen 2.
    I was trying to set up a motion sensor to my hood switch after having my $2600 Catalytic converter stolen !
    I disconnected the connector under the left dash and after reconnecting my vehicle started unlocking five times each time that I unlocked it .
    I haven't added the motion sensor or messed with any wiring.
    I decided to disconnect the 12 volt battery for a few minutes to reset things. After that my central display and instrument cluster stopped working completely. I tried various reset procedures that I found online. After that the instrument cluster started working, but my display still doesn't work, so I have no sound, no air conditioning, nothing.
    The vehicle still drives normally.
    Any help is appreciated.
    Thanks !
     
  16. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
  17. Ariley2

    Ariley2 New Member

    Joined:
    Jan 30, 2021
    1
    0
    0
    Location:
    Springfield, OR
    Vehicle:
    2008 Prius
    Model:
    N/A

    Hey Patka! This exact same thing is now happening with my 2008 Prius. Did you ever find a fix to the issue?
     
  18. Bradley7

    Bradley7 New Member

    Joined:
    May 7, 2021
    10
    2
    0
    Location:
    IL
    Vehicle:
    2011 Prius
    Model:
    III
    My 2011 prius has the same issue. Multifunction display just suddenly died (monitor blank). But i noticed that my bluetooth stopped working ~ 2 weeks prior.

    Any update?

    Btw, is it safe to drive this car without that monitor working? Mine has 180K.
     
  19. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    sounds like it need to be replaced. no problems driving it
     
  20. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,854
    3,967
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    How can it be the same issue. Aren't the MFDs completely different? Maybe ask in one of the Gen 3 forums.