1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Invisible qi mod (wireless phone charging)

Discussion in 'Prius v Accessories and Modifications' started by Piet25, Jan 1, 2021.

Tags:
  1. Piet25

    Piet25 New Member

    Joined:
    Jan 1, 2021
    8
    5
    59
    Location:
    Netherlands
    Vehicle:
    2012 Prius v wagon
    Model:
    V
    I moddet my prius v and add qi charging to the center console.
    By sharing I hope to insipre other Prius drivers.

    On the front of the center console there is a flat spot.
    Using a opening tool I removed the plastic part.
    Ones I got it loose I took it inside to work on it.
    I tested the best spot for the QI charger using a 3S lipo. Once I found Sweet spot I used a knife to make shure the QI coils were as close to the plastic surface as posible. I installed the PCB using a hot glue gun.
    Using a multimeter to check the 12v line from the 12v socket, it measured 14v witch was no problem for the QI charger, it can handle 12 to 24volt.
    I needed to cut the wire of the 12v socket to add the QI charger. I used heatshrink tubes that contain tin to make a nice solder joint.
    As you can see in the video the phone in charing in any directory. This is because i used a 3 coil charger.
     

    Attached Files:

    #1 Piet25, Jan 1, 2021
    Last edited: Jan 1, 2021
    gromittoo, AandMev and lrisius like this.
  2. lrisius

    lrisius Member

    Joined:
    Aug 23, 2015
    120
    56
    0
    Location:
    Illinois
    Vehicle:
    2015 Prius v wagon
    Model:
    Three
    That is pretty slick. What did you use/where did you get the charging unit?
     
    #2 lrisius, Jan 4, 2021
  3. Piet25

    Piet25 New Member

    Joined:
    Jan 1, 2021
    8
    5
    59
    Location:
    Netherlands
    Vehicle:
    2012 Prius v wagon
    Model:
    V
    Thnx, you can purchase these "qi charger diy" units from ebay or even aliexpress. Just searched for QI DIY
     
    #3 Piet25, Jan 5, 2021
    lrisius likes this.
  4. Kaiso

    Kaiso New Member

    Joined:
    Feb 25, 2021
    12
    5
    0
    Location:
    Los Angeles
    Vehicle:
    2017 Prius v wagon
    Model:
    Four
    Very cool. It is a mod I'm interesting in doing myself. My V is 2017 so slightly different.
     
    #4 Kaiso, Mar 12, 2021
  5. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,486
    5,050
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Any issues with the phone sliding off?
     
    #5 rjparker, Mar 13, 2021
    gromittoo likes this.
(You must log in or sign up to post here.)