1. Attachments are working again! Check out this thread for more details and to report any other bugs.

techstream user, good battery then p3000 and p0A80 EVERY 1-2 WEEKS

Discussion in 'Gen 2 Prius Technical Discussion' started by scottyj, Sep 19, 2020.

  1. scottyj

    scottyj Junior Member

    Joined:
    Jul 13, 2018
    3
    0
    0
    Location:
    seattle
    Vehicle:
    2004 Prius
    Model:
    Base
    I GOT P3000 WITH BLOCK 14 LOWEST
    I GOT P0A80 WITH 14 LOWEST
    I HAVE TESTED THIS BATTERY WITH HOBBY CHARGERS DRAING THEM TO 6.2VOLT AND CHARGE THEM
    I HAVE LOAD TEST EVERY CELL WITH A 50AMP LOAD TESTER .. ALL OF THEM HOLD ABOVE 7.2 VOLTS FOR 5 SEC
    IS IT THE BATTERY
    THE ECM
    WHEN I SEE LIVE DATA all cell/blocks ar with in .30 volt of each other
     
    #1 scottyj, Sep 19, 2020
  2. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,302
    4,241
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    #2 SFO, Sep 20, 2020
    PriusCamper likes this.
  3. PriusCamper

    PriusCamper Senior Member

    Joined:
    Mar 3, 2012
    11,330
    4,614
    0
    Location:
    Pacific Northwest, USA
    Vehicle:
    2007 Prius
    Model:
    Two
    I live south of you in Olympia... One of the two modules in block 14 has a cell that is starting to fail, but hasn't failed completely... Usually its moduel #28...

    Figuring out which of the two modules, replacing it, then reconditioning whole pack is next step.

    Charging up all modules to max charge and then measuring voltage after a few days (self-discharge test) may help you find which module it is.

    Alternatively, if you're just driving around town and can quickly clear the codes in a way that doesn't complicate your day too much, you can wait till the bad cell gets worse and is easier to identify...
     
    #3 PriusCamper, Sep 21, 2020
(You must log in or sign up to post here.)