1. Attachments are working again! Check out this thread for more details and to report any other bugs.

ABS, Traction Control, and Brake lights on with DTC code C0210.

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by UltimusTK, Jan 4, 2020.

  1. UltimusTK

    UltimusTK New Member

    Joined:
    Jan 4, 2020
    1
    0
    0
    Location:
    Springfield, MO
    Vehicle:
    2010 Prius
    Model:
    N/A
    Hey everybody, I have a 2010 Prius with 96,000 miles. My symptoms are mushy brakes as well as the brakes do not charge the battery. I recently got techstream so I was able to pull the codes. This is what came up.

    [​IMG]

    [​IMG]
    so the DTC code C0210 points to the right rear speed sensor. I have replaced the whole hub assembly, speed sensor included, and the code hasn't changed. I did another health check on techstream and this is what came up after replacing hub assembly.

    [​IMG]

    I'm just completely lost on where to go now. I'd appreciate any suggestions.
     

    Attached Files:

    #1 UltimusTK, Jan 4, 2020
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Sounds like air in the brake line
     
    #2 tankyuong, Jan 4, 2020
  3. hwg1996

    hwg1996 New Member

    Joined:
    Jan 4, 2020
    2
    0
    0
    Location:
    Baltimore, MD
    Vehicle:
    2013 Prius
    Model:
    Two

    Exact same issue. Took it to a Toyota dealer and they said the Reservoir Assembly (part #47220-47080) needed to be replaced.
     
    #3 hwg1996, Jan 4, 2020
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,912
    16,215
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Highly unlikely to be the same issue (exact, or even approximate). I see that you've even posted this on another thread where the issue was different from this one, and said it was the exact same issue there too. What gives?

    There are a lot of reasons for brake warnings to come on. As for how often they mean the reservoir needs replacing, well, this is the first case I've seen.
     
    #4 ChapmanF, Jan 4, 2020
  5. Michael Wood

    Michael Wood Active Member

    Joined:
    Jun 19, 2016
    179
    118
    3
    Location:
    Boston, MA
    Vehicle:
    2020 Prius Prime
    Model:
    LE
    Check with the dealer - there's a warranty extension to 10 years or 150k miles on certain braking system / ABS failures. I got a notice about this in the mail for my Gen III. There's a website where you can enter your VIN to see what's covered.
     
    #5 Michael Wood, Jan 20, 2020
  6. Riki

    Riki New Member

    Joined:
    Feb 15, 2023
    13
    3
    0
    Location:
    Tampa
    Vehicle:
    2011 Prius
    Model:
    N/A
    Hi there, I have had the same code for a couple of months.
    Prius 2011, 150,000 miles, C0210, The ABS, Slip and both brake warning lights are on.
    The regenerative brake is not functioning.

    A mechanic found out that the electricity is not coming from the wire inside of the body that is connected with the ABS wire harness.
    So the problem should be inside of the body, wires or ECU.

    Any suggestions are appreciated.
    Thank you in advance.
     
    #6 Riki, Feb 18, 2023
(You must log in or sign up to post here.)