1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 MFD Goes Dark When Headlights Go On

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Indy John, Jan 3, 2020.

  1. Indy John

    Indy John Member

    Joined:
    Jul 16, 2008
    75
    33
    0
    Location:
    Indianapolis
    Vehicle:
    2010 Prius
    Model:
    Two
    Haven't driven at night for a while, and when I turned the parking lights and/or headlights on last night the MFD and other "dash" lights went dark. Only the "Ready" light and seat belt reminder stayed on. Headlights and parking lights off, they came back. With headlights on, I checked that all bulbs were lit. No codes showing and the 12-volt battery tests 12.8 volts, 375 CCA, and 100% life. Any thoughts?
     
    #1 Indy John, Jan 3, 2020
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,675
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    The dash lights are supposed to dim, by design, when the headlights are turned on. I think. Try playing with the brightness dial, low, to the left of steering wheel.
     
    #2 Mendel Leisk, Jan 3, 2020
    Threej, pjksr02, scona and 3 others like this.
  3. iskoos

    iskoos Active Member

    Joined:
    Dec 24, 2017
    401
    246
    0
    Location:
    Orlando, FL
    Vehicle:
    2010 Prius
    Model:
    III
    I would second what Mendel said above. The same happened to me once and I panicked. It was the brightness dial.
    And once I put some paper document on dash and moved it forward so it doesn't slide off while driving. I lost the left screen. I realized the paper I placed blocked the projection(or maybe reflection would be the right word):).
     
    #3 iskoos, Jan 4, 2020
    Mendel Leisk likes this.
  4. Indy John

    Indy John Member

    Joined:
    Jul 16, 2008
    75
    33
    0
    Location:
    Indianapolis
    Vehicle:
    2010 Prius
    Model:
    Two
    Thanks, but they go dark/off/disappear completely, not just dim. Dimmer dial doesn't bring them back.
     
    #4 Indy John, Jan 5, 2020
    Mendel Leisk likes this.
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,675
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Dang.
     
    #5 Mendel Leisk, Jan 5, 2020
  6. AzWxGuy

    AzWxGuy Weather Guy

    Joined:
    May 22, 2011
    1,003
    498
    0
    Location:
    Tucson, AZ
    Vehicle:
    2021 Prius
    Model:
    Limited
    In consideration of the 10 years of dust that may have accumulated in the potentiometer, I would try several full-range manipulations of the dimmer dial making sure to move through the clicks at either end of the range. I might personally go as far as spraying some contact cleaner into the dial, but this might not be good for the various plastics in there. Failing this, maybe a fuse?
     
    #6 AzWxGuy, Jan 6, 2020
    ASRDogman likes this.
  7. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,421
    3,410
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    If you turn the all the way ON, past the little bump you feel, the display will be at full brightness,
    as it is during day driving. If you go just past the bump, when you turn the lights on the display will be dimmer.
     
    #7 ASRDogman, Jan 6, 2020
  8. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,404
    6,062
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring
    Definitely something in the dimmer circuit.
     
    #8 TMR-JWAP, Jan 6, 2020
(You must log in or sign up to post here.)