1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Metal Clanking Noise Coming From Left Front Tire Area

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by BV3, Sep 18, 2019.

  1. BV3

    BV3 Junior Member

    Joined:
    Aug 11, 2019
    13
    5
    0
    Location:
    Green Bay, WI
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    Hello again PriusChat,

    So this issue has been going on for awhile and I thought that it was a usual noise for the Prius since it’s a hybrid. But after driving my ‘05 prius for 5,000 more miles after discovering the issue, the noise has gotten louder. The noise sounds like a metal gear rubbing up again something and it sounds even worse when driving straight like down a highway or down a road. It doesn’t make any noise when I brake or anything. I have a fear of my tires just falling off but I don’t want to get anything replaced until I find an answer. My left tire area is also making a dragging metal noise type but I don’t see anything dragging either. Do you guys know anything? My buddy thinks it’s the wheel bearing hubs but he’s not 100% sure. There’s also a missing brake dust guard on the right side as well.

    ***The first 5 photos are from the right side of the car. The last 4 photos are from the left side of the car.***
     

    Attached Files:

    #1 BV3, Sep 18, 2019
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Green Bay WI. Damn look at all that rust!

    It looks like it would be any part making that noise, axles, brakes, bearings......
     
    #2 JC91006, Sep 18, 2019
    BV3 likes this.
  3. BV3

    BV3 Junior Member

    Joined:
    Aug 11, 2019
    13
    5
    0
    Location:
    Green Bay, WI
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    Lol I know! So much rust. But thanks for the advice. I couldn’t upload the videos on PriusChat so I uploaded them on YouTube. Here are the links!


     
    #3 BV3, Sep 18, 2019
    Raytheeagle likes this.
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    maybe a bad cv joint?

    great videos btw
     
    #4 bisco, Sep 18, 2019
    BV3 likes this.
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,234
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I found brushed on "boiled linseed oil" nothing short of miraculous.
     
    #5 Mendel Leisk, Sep 18, 2019
    BV3 likes this.
  6. BV3

    BV3 Junior Member

    Joined:
    Aug 11, 2019
    13
    5
    0
    Location:
    Green Bay, WI
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    Yeah I’ve heard of a bad CV joint. Will probably recommend that to a mechanic for advice when I see one soon. Thanks!
     
    #6 BV3, Sep 18, 2019
    bisco likes this.
  7. oldtechaa

    oldtechaa Active Member

    Joined:
    Dec 28, 2018
    336
    222
    0
    Location:
    NZ
    Vehicle:
    2013 Prius Alpha
    Model:
    N/A
    Also probably disgustingly smelly, especially when burned off by any hot or friction-affected parts. I can't speak about its effectiveness, though.
     
    #7 oldtechaa, Sep 18, 2019
    Mendel Leisk likes this.
  8. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,234
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    No smell when dry, slightly varnish-like smell when applying. Unless you apply with sprayer and get overspray on exhaust, no problems. Very durable too. I'll try to post a before/after pic tomorrow.
     
    #8 Mendel Leisk, Sep 19, 2019
    Raytheeagle likes this.
  9. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,234
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Right-rear corner, bottom connection of shock, and the metadata says April of 2015:

    upload_2019-9-19_6-16-29.png

    Somewhere between then and now, at least 18 months back, I applied boiled linseed oil. A picture snapped this morning:

    upload_2019-9-19_6-44-27.png
     
    #9 Mendel Leisk, Sep 19, 2019
    Last edited: Sep 19, 2019
    davecook89t likes this.
  10. davecook89t

    davecook89t Senior Member

    Joined:
    May 10, 2016
    1,063
    796
    0
    Location:
    Washington State, Florida
    Vehicle:
    2017 Prius
    Model:
    Four Touring
    It seems almost miraculous. Did you remove any of the surface rust with a wire brush or something? How can any product just make it disappear? None of the parts were replaced, right?

    [Edit] I just realized I used the exact same word you used.(y)
     
    #10 davecook89t, Sep 19, 2019
    Mendel Leisk likes this.
  11. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,234
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    No wire brush. No parts change. Brushed off loose dirt/rust with a paint brush, a bit. I would assume the surface rust (a little more progressed) is still under there. But the linseed oil seals things good. I applied it with a foam brush.

    Edit: @tvpierce turned me on to this btw.
     
    #11 Mendel Leisk, Sep 19, 2019
    Last edited: Sep 19, 2019
    BV3 and davecook89t like this.
  12. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    when you seal the rust in, does it keep eating away?
     
    #12 bisco, Sep 19, 2019
  13. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,686
    39,234
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I suspect not, starved of oxygen?
     
    #13 Mendel Leisk, Sep 19, 2019
    davecook89t likes this.
  14. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    interesting, thank you!
     
    #14 bisco, Sep 19, 2019
  15. BV3

    BV3 Junior Member

    Joined:
    Aug 11, 2019
    13
    5
    0
    Location:
    Green Bay, WI
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    Update:

    So I decided to replace my CV axles, wheel bearings, dust shields, brake pads and also my rotors. Now I don’t hear anything! Everything all runs smooth with no weird noises. Thanks for the input PriusChat.
     
    #15 BV3, Oct 1, 2019
    bisco and Mendel Leisk like this.
(You must log in or sign up to post here.)