1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Help to identify connector (behind front bumper)

Discussion in 'Gen 2 Prius Main Forum' started by Victorio Mo, Jul 5, 2019.

Tags:
  1. Victorio Mo

    Victorio Mo Member

    Joined:
    Oct 6, 2012
    114
    30
    0
    Location:
    Folsom, California
    Vehicle:
    2008 Prius
    Hi All,

    I just replaced front bumper cover and find some loose / disconnected connector like on photo, it's located on the center , behind metal bumper , I have fog lights and they working OK.
    Is this for AirBag ?? I posted photo. Small piece is also loos with yellow insert. Thanks for help !!!
    [​IMG]

    https://i.stack.imgur.com/BoePz.jpg
    Best mario
     

    Attached Files:

    • fb.jpg
      fb.jpg
      File size:
      31.7 KB
      Views:
      0
    #1 Victorio Mo, Jul 5, 2019
    Last edited: Jul 5, 2019
  2. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,522
    1,795
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    Outside temperature sensor?
     
    #2 RRxing, Jul 5, 2019
    Raytheeagle likes this.
  3. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,817
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    If its high on center its either the horn or the temp sensor. See if horn works or the outside temp on the mfd works.
     
    #3 edthefox5, Jul 5, 2019
  4. Victorio Mo

    Victorio Mo Member

    Joined:
    Oct 6, 2012
    114
    30
    0
    Location:
    Folsom, California
    Vehicle:
    2008 Prius
    Tx all !!
    Horn works OK. So Temp Sensor is solid candidate. Still need to figure out do I need to plug anything between those 2 or not. There 2 pieces and big one has kinda of latch. on top left photo I hold 2 of them. They both on 2 wires.

    Anybody knows where this sensor attached ?

    Best
    V
     
    #4 Victorio Mo, Jul 5, 2019
    Last edited: Jul 5, 2019
  5. Fixnstuff

    Fixnstuff New Member

    Joined:
    Jul 17, 2019
    3
    1
    0
    Location:
    Brampton Ontario Canada
    Vehicle:
    2004 Prius
    Model:
    N/A
    Second picture looks like outside air temperature sensor. It should be attached to the one metal bar running up/down between the front bumper and the ac condenser/rad. Third picture looks like the connector that plugs into the hood latch which has a switch to trigger the burglar alarm if someone opens the hood with alarm on (doors locked). Good luck!
     
    #5 Fixnstuff, Jul 17, 2019
    Victorio Mo likes this.
(You must log in or sign up to post here.)