Need help solving probable wheel sensor issue

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Dan Walker, Jun 30, 2019.

  1. Dan Walker

    Dan Walker New Member

    Joined:
    Jun 24, 2019
    3
    0
    0
    Location:
    Southern California
    Vehicle:
    2012 Prius
    Model:
    Three


    Over 190000 trouble free ( except oil consuming ) miles on a 2012 Prius. Son got run off road by crazy driver. Traction control, ABS, and (!) lights lit. Found a mangled and disconnected wire connector in right front wheelwell. Blue and pink wires going forward, black and white wires toward rear. Don't know which way to connect as the connector was mangled by what hit it.

    I'm hoping this is the source of the dash indications. Can someone please give the link for getting codes from the OBD connector ? Also, how do I reset the system once I get the wires connected properly?

    Thanks,

    Dan
     
    #1 Dan Walker, Jun 30, 2019
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Just connect them and drive a block it will clear itself, if the it doesn’t then reverse the wires
     
    #2 tankyuong, Jul 1, 2019
    Leadfoot J. McCoalroller likes this.
  3. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,261
    15,499
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    You could always look at the other side of the car and see how the wires are oriented ;).

    Good luck and keep us posted (y).
     
    #3 Raytheeagle, Jul 1, 2019
  4. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    The other side is opposite since it’s spinning opposite direction
     
    #4 tankyuong, Jul 1, 2019
  5. Dan Walker

    Dan Walker New Member

    Joined:
    Jun 24, 2019
    3
    0
    0
    Location:
    Southern California
    Vehicle:
    2012 Prius
    Model:
    Three
    Well I have them one way and nothing has changed. I'll reverse them and give it a go.
     
    #5 Dan Walker, Jul 1, 2019
  6. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    57,972
    39,995
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Looked at our 2010: the only wire is black, with a light-green stripe. Not sure if it'll be of any help, but maybe the connector shape will give a clue. There's a bolt holding it on at the hub.

    IMG_0699.JPG
    IMG_0697.JPG
    IMG_0698.JPG
     
    #6 Mendel Leisk, Jul 1, 2019
  7. Dan Walker

    Dan Walker New Member

    Joined:
    Jun 24, 2019
    3
    0
    0
    Location:
    Southern California
    Vehicle:
    2012 Prius
    Model:
    Three
    The wires that were damages were at the top of the wheel well toward the back. Maybe they're not related.
     
    #7 Dan Walker, Jul 1, 2019
  8. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Make sure you drive a couple blocks before the lights go away
     
    #8 tankyuong, Jul 2, 2019
(You must log in or sign up to post here.)