1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2005 Prius hesitates to shut off ICE engine

Discussion in 'Gen 2 Prius Main Forum' started by Prius Rising, Apr 15, 2019.

Tags:
  1. Prius Rising

    Prius Rising Member

    Joined:
    Mar 20, 2019
    151
    78
    0
    Location:
    Ohio
    Vehicle:
    2005 Prius
    Model:
    N/A
    I have been driving the car the past few weeks and I noticed that sometimes when I stop at a light and the car does a hard stall. It's like it doesn't want to shut down the ICE engine when it should. I am not getting codes for that but it is throwing the catalytic efficiency not optimal code. I also heard the accelerator pedal sensors can cause this. Anyone else had this issue? (n)
     
    #1 Prius Rising, Apr 15, 2019
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,135
    50,051
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    how many miles on her? what code reader are you using?
     
    #2 bisco, Apr 15, 2019
  3. 09Prius2

    09Prius2 Member

    Joined:
    Aug 20, 2016
    201
    88
    0
    Location:
    FL
    Vehicle:
    2009 Prius
    Model:
    Two
    If you havent changed your spark plugs you need to. They would be 15 years old and contribute to your catalyst code. Also air filter.

    That could be why it sounds or feels rough. If you change the plugs, clear the code and it comes back, your cat is actually bad and likely unrelated directly to the hard shutdown.

    However its a 15 year old hybrid. They dont run as smooth once they're not new anymore.

    One cause I've noticed at a stop is sometimes the battery is too full, so the engine is running unnecessarily which has something to do with protecting the hybrid system from too much voltage. This would go on for a minute or so and stall hard afterwards, presumably as if the engine just wanted to keep going.
     
    #3 09Prius2, Apr 15, 2019
    Prius Rising likes this.
  4. Prius Rising

    Prius Rising Member

    Joined:
    Mar 20, 2019
    151
    78
    0
    Location:
    Ohio
    Vehicle:
    2005 Prius
    Model:
    N/A
    209,000 on the chassis and 180,000 on the replacement motor. I am using the Torque pro reader. The only codes it is throwing are bad 3 way valve (it's brand new) and the Catalyst non efficient in bank one. Also, there is a large difference in the Catalyst bank temps. It may be a clogged converter. What do you think?
     
    #4 Prius Rising, Apr 16, 2019
  5. Prius Rising

    Prius Rising Member

    Joined:
    Mar 20, 2019
    151
    78
    0
    Location:
    Ohio
    Vehicle:
    2005 Prius
    Model:
    N/A

    Plugs are brand new as well as the air filter,
     
    #5 Prius Rising, Apr 16, 2019
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,135
    50,051
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i'm not sure that torque picks up all the correct codes. i think @ericbecky knows
     
    #6 bisco, Apr 16, 2019
    Prius Rising likes this.
  7. Prius Rising

    Prius Rising Member

    Joined:
    Mar 20, 2019
    151
    78
    0
    Location:
    Ohio
    Vehicle:
    2005 Prius
    Model:
    N/A
    Ya, It is throwing the p1121 code that Torque pro says is a "pedal position sensor" issue but the whole internet says it a bad 3 way valve code for Prius. I heard about the 3 way valve issues and inverter pump issues and changes them both with new when we changed the ICE engine. I have read that the throttle position sensor (throttle pedal) goes bad in the gen 2 and the symptoms would align with that but I don't want to just start throwing parts at it without having more info.
     
    #7 Prius Rising, Apr 16, 2019
  8. ericbecky

    ericbecky Hybrid Battery Hero

    Joined:
    Mar 12, 2004
    4,379
    3,238
    1
    Location:
    Madison, Wisconsin
    Vehicle:
    2005 Prius
    Model:
    Two
    The code is correct, just the description is wrong.
    I never trust Torque descriptions.
     
    #8 ericbecky, Apr 16, 2019
    Prius Rising likes this.
(You must log in or sign up to post here.)