1. Attachments are working again! Check out this thread for more details and to report any other bugs.

109K....Control Arms and Stabilizer Link

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by The Count, Apr 6, 2019.

  1. The Count

    The Count Junior Member

    Joined:
    Mar 9, 2013
    16
    5
    0
    Location:
    People's Republic of California
    Vehicle:
    2010 Prius
    Model:
    V
    2010 Prius V, 109K, all recall maintenance done.
    Got back from the dealer and they provided an estimate on repairs:

    *Front Lower Control Arms w/ a recommendation to replace the arm bushings = $1790

    *Front Stabilizer Brake Link = $445

    *Front Brake Pad replacement and machine rotors = $264

    Aside from procuring the parts myself, does any of this price wise seem off the mark?
     
    #1 The Count, Apr 6, 2019
    Fostel likes this.
  2. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,257
    15,491
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    They all seem high to me;).

    Where in the People’s Republic of California are you located:whistle:?

    Good luck and keep us posted (y).
     
    #2 Raytheeagle, Apr 6, 2019
    Fostel likes this.
  3. frodoz737

    frodoz737 Top Wrench

    Joined:
    Aug 26, 2010
    4,297
    2,348
    33
    Location:
    Texas
    Vehicle:
    2015 Prius
    Model:
    Four
    #3 frodoz737, Apr 6, 2019
    Fostel, Pluggo and Raytheeagle like this.
  4. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    Those prices are about right except for the control arms. The labor time on the control arms is 3.2 and the arms list for about $200/each. Plus you will need an alignment afterwards. I would expect for the control arms to cost around $1200.
     
    #4 The Critic, Apr 6, 2019
    Fostel likes this.
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    This at least you could save around $200 if you DIY. Toyota front brake pads are $37, item 8 here:

    Front Brakes for 2010 Toyota Prius | McGeorge Toyota Parts

    I don't see the shims, probably around $10, and worth replacing as well. I would not machine the rotors if you're not having any problems. You could DIY this, leisurely, in an afternoon, with some Sil-Glyde Brake lubricant (for the pins, and rubber), and Permatex Anti-Sieze (points of contact between pad backs, shims and caliper.

    I would not bother with machining, in particular if you're having no problems and they look good. If you're concerned to check the rotors, you need a dial indicator with magnetic base, and a micrometer 0-25 mm. Both those items will last forever, cost under $100 for sure. The runout and min thickness info is in the attachment.

    One Prius caution: disconnect 12 volt neg cable before doing anything else, and when everything is reassembled, push the brake pedal multiple times take out any excess travel (due to compressing the pistons to accept new pads), and only then reconnect the 12 volt.

    Follow up with a short test drive, going really easy on the brakes, no hard braking. Let them get seated.

    I'm pretty sure @NutzAboutBolts has a video on this, pinned in Maintenance Forum?
     

    Attached Files:

    #5 Mendel Leisk, Apr 6, 2019
    Fostel likes this.
  6. The Count

    The Count Junior Member

    Joined:
    Mar 9, 2013
    16
    5
    0
    Location:
    People's Republic of California
    Vehicle:
    2010 Prius
    Model:
    V
    Torrance
     
    #6 The Count, Apr 7, 2019
    Raytheeagle likes this.
  7. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,257
    15,491
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    Have you tried shopping around, day at @Avi's Advanced Automotive or at Hybrid Pit?

    They are both So Cal shops and probably a bit better on price.

    Good luck and keep us posted (y).
     
    #7 Raytheeagle, Apr 7, 2019
    The Count and The Critic like this.
  8. The Count

    The Count Junior Member

    Joined:
    Mar 9, 2013
    16
    5
    0
    Location:
    People's Republic of California
    Vehicle:
    2010 Prius
    Model:
    V
    Thanks for all the replies! I'm not the mechanic and don't have the space or tools at the moment. One day, perhaps.

    I'll check out Hybrid Pit for sure. Digging the reviews.
     
    #8 The Count, Apr 10, 2019
  9. Nopho4u

    Nopho4u Senior Member

    Joined:
    Aug 25, 2016
    1,007
    2,061
    0
    Location:
    Socal son
    Vehicle:
    2015 Prius
    Model:
    Persona
    You will go to hybridpit for maintenance and come out with a jdm prius maxed out 46182925_195976421324537_8537169934879646762_n.jpg
     
    #9 Nopho4u, Apr 10, 2019
    Fostel, The Count and orenji like this.
  10. Peter123

    Peter123 Active Member

    Joined:
    Oct 30, 2018
    131
    128
    1
    Location:
    Los Angeles, CA
    Vehicle:
    2011 Prius
    Model:
    Two
    If you live in Torrance, you could also try Lee's Tires in Lomita. They are very good at suspension work.
    You may not need all the parts the stealership told you to replace. And, they won't mind if you bring your own parts
     
    #10 Peter123, Apr 10, 2019
    Fostel likes this.
  11. The Count

    The Count Junior Member

    Joined:
    Mar 9, 2013
    16
    5
    0
    Location:
    People's Republic of California
    Vehicle:
    2010 Prius
    Model:
    V
    @TK Rocket - I know...but this is the family car. I just need it to last and if I can drop some cash to make sure the ride is as smooth as it can be ('10 Prius V).

    I wouldn't mind some minor cosmetic work but anything track related will be a hard pass. I occasionally commute up to the Bay and would like that commute to be a breeze.

    So Hybridpit hasn't responded yet. The Mrs. went in today to the dealership to get the brake job and she asked the question (another quote). Not sure if she batted her eyes but the new quote was 1805 for parts/labor on the control arms and link.
     
    #11 The Count, Apr 12, 2019
(You must log in or sign up to post here.)