1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Engine swap question

Discussion in 'Gen 3 Prius Technical Discussion' started by cnc97, Jun 29, 2018.

  1. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three
    March of 2017, I broke my left hand and pinkie finger trying to put a transmission in the Crown Victoria I had at that time. The worst part was the slice in the back of my hand. It bled like there was no tomorrow.
     
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I remember when I first encountered "special" transmission drain bolts: Hondas invariably have a 3/8" square recess. I phoned up a dealership service department, asked if they knew what special socket was needed. They let me down gently, explained they use just a 3/8" drive ratchet wrench.

    I wish Toyota would use that system, a little easier: any regular wrench will do.
     
  3. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One

    Yep same here. It bled like 5-7 min before my wife put turmeric powder which stopped it instantly. Even doctor was shocked about the bandage my wife put on. It was just the way any doctor would do bandage. She studies medicine so ya.
     

    Attached Files:

    Mendel Leisk likes this.
  4. Ragingfit

    Ragingfit Active Member

    Joined:
    Oct 21, 2015
    189
    246
    0
    Location:
    Aurora, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    Well, that's not supposed to happen.
    A Prius will bite when cornered.
    Everything will cut you!
    You'll be back at it in no time.

     
    Mendel Leisk likes this.
  5. padroo

    padroo Senior Member

    Joined:
    Jan 11, 2008
    2,763
    2,251
    13
    Location:
    Chesterton, Indiana Another third world country.
    Vehicle:
    2016 Prius
    Model:
    Four
    If it is flat just make one.
     
  6. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One
    Done with engine/trans bolts. Exhaust manifold done. Transmission oil done. That took 4 quarts but oNly had 3 quarts inside.Now just coolant, intake and oil change left. Putting in amsoil signature series 0w-20. I had good result on my 9th gen accord so might as well spend extra $10.
     
  7. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One
    @Ragingfit @cnc97

    Do i have to hook up the multimeter to oil sending unit like the video shows or do i just plug everything back and turn it on and put it in maintenance mode to keep the engine cranking
     
  8. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three
    I filled up the oil pump from the outside, then filled the oil filter adapter and installed it. I left the plugs out and put the thing into maintenance mode. It will crank for about 15 seconds before it errors out, provided your hybrid battery is strong enough. Do that twice, and install the plugs.
     
  9. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three
    In theory, if the oil pan has not been off the donor engine, the oil pump should stay primed.
     
  10. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One
    The pan has not been taken off but lkq did drain oil from engine.
     
  11. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Similar to any oil change?

    Still, maybe do the oil pressure sender test anyways?
     
  12. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three
    Some parts stores have for rent, a pressure oil primer. Think of a helium tank for filling balloons, with a removable cap for filling, and a hose with a threaded fitting on the end. Since “most” oil sending units have SAE pipe thread, they work on just about all vehicles.

    Add oil to can, pressurize can with air, thread hose into sensor hole, and open valve. Pressure lubrication of the internals.

    So there are ways to ensure it’s lubed. I just took it for granted mine would be fine.
     
    Robert Holt and mjoo like this.
  13. Ragingfit

    Ragingfit Active Member

    Joined:
    Oct 21, 2015
    189
    246
    0
    Location:
    Aurora, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    You do not have to.
    I wanted to know that the oil pump was pumping.
     
  14. Ragingfit

    Ragingfit Active Member

    Joined:
    Oct 21, 2015
    189
    246
    0
    Location:
    Aurora, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    LKQ does drain the oil but the pump and oil pan are not removed.
     
  15. Dxta

    Dxta Senior Member

    Joined:
    Nov 7, 2016
    1,932
    767
    0
    Location:
    Lagos
    Vehicle:
    2008 Prius
    Model:
    II
    Wao! Never knew turmeric stops bleeding.
    We've got that everywhere in northern Nigeria.
     
  16. Dxta

    Dxta Senior Member

    Joined:
    Nov 7, 2016
    1,932
    767
    0
    Location:
    Lagos
    Vehicle:
    2008 Prius
    Model:
    II
    Pls does anyone here know y when for instance a transmission fluid is drained from a Toyotas transmission system(especially those from transmission systems without a dip gauge) on some 2007- current camries, highlanders, etc, the transmission system tends to shift erratically when selecting?

    I ha e encountered issues like these before, when we removed any of the driveshafts from such vehicles, when the transmission fluid is hot, there's always a problem.

    Sometimes, a new transmission system would have to be ordered.

    From experience, we allowed the transmission system to properly cool down, before removing either driveshafts, or replacing the fluids.
     
  17. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One
    Yes it does. It has antibacterial properties.
     
    Dxta likes this.
  18. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One
    Sounds good. Its gonna run like crap for few seconds till it starts pumping.
     
  19. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One
    The upper radiator is leaking but hose doesnt have crack. I tried with new clamp and still leaks. Lost about gallon of coolant
     
  20. Apatel1101

    Apatel1101 Member

    Joined:
    Jan 8, 2019
    160
    60
    0
    Location:
    Orland Park
    Vehicle:
    2010 Prius
    Model:
    One
    So i took out the housing to check the leak. I filled it up with water on rhe inlet side and it started dripping and found the hairline cracks. I used jb weld so lets see. I didnt have access to plastic welder otherwise i would have used that.
     

    Attached Files:

    Ragingfit likes this.