1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Actual puddle lights installed

Discussion in 'Gen 4 Prius Accessories and Modifications' started by Depe, Aug 18, 2018.

  1. Depe

    Depe Junior Member

    Joined:
    Oct 2, 2012
    33
    23
    0
    Location:
    Tennessee
    Vehicle:
    2017 Prius
    Model:
    Four Touring
    I’ve had these installed for awhile now. They are OEM puddle lights that you can get off of the new Nissan/Infiniti cars and not a cheap set from eBay. Wiring is just like OEM, in which I ran them to the drivers side a pillar. They activate when you open the doors and/or when you walk up to the car and the courtesy lights light up
     

    Attached Files:

    #1 Depe, Aug 18, 2018
    krmcg, Starship16 and padroo like this.
  2. padroo

    padroo Senior Member

    Joined:
    Jan 11, 2008
    2,763
    2,251
    13
    Location:
    Chesterton, Indiana Another third world country.
    Vehicle:
    2016 Prius
    Model:
    Four
    How are they mounted?
    Putting anything under a car in the rust belt has to survive winter slush and snow.
     
    #2 padroo, Aug 18, 2018
  3. Starship16

    Starship16 Senior Member

    Joined:
    Jun 8, 2018
    1,348
    1,454
    0
    Location:
    Beach Christmas
    Vehicle:
    2016 Prius
    Model:
    ----USA----
    They look very nice. (Be careful if you have to jack up the car to change a flat.) Great picture, I wish the rear tail lights were really that bright. :)
     
    #3 Starship16, Aug 18, 2018
  4. Depe

    Depe Junior Member

    Joined:
    Oct 2, 2012
    33
    23
    0
    Location:
    Tennessee
    Vehicle:
    2017 Prius
    Model:
    Four Touring
    The are mounted to the side skirts. Holes were drilled for the light. Then 2 mounting holes were drilled per light and held in with oem nissan clips lol
    No worries sir. I do all my own work and made sure to mount it away from the jacking points. Also I will never jack up the car any where along the sides.
     
    #4 Depe, Aug 18, 2018
    Last edited: Aug 18, 2018
    Starship16 likes this.
  5. Starship16

    Starship16 Senior Member

    Joined:
    Jun 8, 2018
    1,348
    1,454
    0
    Location:
    Beach Christmas
    Vehicle:
    2016 Prius
    Model:
    ----USA----
    Looks great. I wish I had that kind of installation skill. (And I hope I never have to use that little scissor jack that came with my car. :LOL:)
     
    #5 Starship16, Aug 18, 2018
  6. dml996

    dml996 Junior Member

    Joined:
    Jan 17, 2014
    9
    3
    0
    Location:
    Spartanburg, South Carolina
    Vehicle:
    2012 Prius
    Model:
    Three
    how did you wire them? Where is the switch?
     
    #6 dml996, Sep 9, 2018
  7. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,675
    39,222
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    You should do a dry run, see what you're in for. The link between the torsion rod and the jack is a cast eye: the torsion rod crook dances around like crazy with every turn. And the metal is very soft, starts getting chewed up right away. Looks like this:

    upload_2018-9-9_7-13-14.png

    It's the single eye design that makes it so unstable. Honda (OTOH) uses a bent-plate in a U-shape, with two holes, which keeps it much more stable as you turn:

    upload_2018-9-9_7-18-2.png

    Sorry for being off-topic, can't resist a rant.
     
    #7 Mendel Leisk, Sep 9, 2018
(You must log in or sign up to post here.)