1. Attachments are working again! Check out this thread for more details and to report any other bugs.

error P0A0D after rebuild.. saftey plug seated correctly, other codes present

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Beachbummm, Mar 29, 2018.

Tags:
Page 2 of 2
  1. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    I'm curious how long this will last you. As you stated before, your previous repairs have lasted a long time. But now with older modules.....time will tell.
     
    #21 JC91006, Mar 30, 2018
    Raytheeagle likes this.
  2. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,257
    15,491
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    Doesn’t seem like (or nothing noted) any balancing was done, just a swap and go:(.

    It will be interesting (y).
     
    #22 Raytheeagle, Mar 30, 2018
    JC91006 likes this.
  3. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Yeah BeachBuum is a swap and goer
     
    #23 JC91006, Mar 30, 2018
    Raytheeagle likes this.
  4. Beachbummm

    Beachbummm Senior Member

    Joined:
    Sep 12, 2013
    1,160
    392
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Five
    ya gotta do what ya gotta do.. voltages ranged from 7.4 to 7.9 so it should be fine.. as mentioned all gen 2 mods are nearing 10 years old as is the car so I think the next time it dies Ill just sell her as-is and get something else.. its not cost effective to put over $1000 into a car wirth $2500 in good condition.. yes I know KKB says my baby is worth $3800 but in the real world its $2500 on a good day, cash buyer are few and far between here
     
    #24 Beachbummm, Mar 30, 2018
  5. Andyprius1

    Andyprius1 Senior Member

    Joined:
    Feb 4, 2013
    2,327
    859
    1
    Location:
    Cool CA
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Base
    Thankyou Pat.
     
    #25 Andyprius1, Mar 30, 2018
  6. Andyprius1

    Andyprius1 Senior Member

    Joined:
    Feb 4, 2013
    2,327
    859
    1
    Location:
    Cool CA
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Base
    TY that all makes sense.
     
    #26 Andyprius1, Mar 30, 2018
  7. Beachbummm

    Beachbummm Senior Member

    Joined:
    Sep 12, 2013
    1,160
    392
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Five
    true I got 14 months out of the last one for a 2 mod swap... I assume the car is still driving around somewhere sold it when I bought this 08.. its just a car, they all die sooner or later.. that's why I don't pay a lot for them to start with..
     
    #27 Beachbummm, Mar 30, 2018
  8. scargi01

    scargi01 Active Member

    Joined:
    Mar 20, 2007
    784
    57
    0
    Location:
    Missouri
    Vehicle:
    2005 Prius

    I experienced this very code on my 05. I replaced modules and put in back in the car, connected it up to see if it would throw any codes. I turned the car on and had no issues so I decided to drive it around a little. On the way back I had to make a hard brake because of traffic. Almost immediately it threw codes and the red triangle. When I got back home and researched it I found that not being grounded could be a cause of the problem. I bolted the case down and the issue went away. I guess when it put it in the car and connected everything it was grounded but the hard braking maybe moved it a little and it lost ground.
     
    #28 scargi01, Oct 14, 2019
    bisco likes this.
(You must log in or sign up to post here.)
Page 2 of 2