Help me PriusChat, you're my only hope (to identify these screws...)

Discussion in 'Gen 4 Prius Care, Maintenance and Troubleshooting' started by UltraJetRefill, Feb 19, 2018.

Page 1 of 2
  1. UltraJetRefill

    UltraJetRefill Member

    Joined:
    Dec 11, 2017
    155
    93
    0
    Location:
    Tucson, AZ
    Vehicle:
    2017 Prius
    Model:
    Two
    I've had the car since Dec 2017, and never noticed them (ahem, maybe I should vacuum more...). Two screws were sitting next to the carpet on the driver's side (yellow circle in pic). Does anyone know where they might have come from? They almost look like they would screw into plastic.

    My original thought is that someone removed the inside door cover when installing the window tint and forgot to reinstall them. I watched this video on the door panel removal (fascinating, BTW!), and the screw with the larger head might be the one under the cover of the interior door latch (#2 in the first video). He only removes three though, and none look like the small one in my pics.

    Door panel removal.

    This guy does it much slower, and screw #1 and #3 don't seem to match mine. Maybe #2...

    I guess I just need to pull the panel off and see if anything's missing, but I thought I'd check in first. I do have the plastic body panel tools, so I guess that's good. I always get a little nervous with plastic tabs though. :eek:

    Inked20180213_163201_LI.jpg
    20180219_114747.jpg
    20180219_114726.jpg
     
    #1 UltraJetRefill, Feb 19, 2018
  2. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    57,962
    39,991
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    They're two distinct screws, look like self-tapping tips, and both those factors say to me they are not stock. Maybe something spilled out of an installer's pocket??

    If you're not hearing anything untoward, I would do nothing, certainly don't start prying panels off. I've never heard of tinters needing to open up door panels.
     
    #2 Mendel Leisk, Feb 19, 2018
    kithmo, RCO and UltraJetRefill like this.
  3. UltraJetRefill

    UltraJetRefill Member

    Joined:
    Dec 11, 2017
    155
    93
    0
    Location:
    Tucson, AZ
    Vehicle:
    2017 Prius
    Model:
    Two
    I'm hoping you're right. I'm not very familiar with how the window tint is put on, but it seems like it would be quite difficult to press it on near the front-bottom of the window without removing the door panel since it's kind of hidden. I agree though, I really don't want to go pulling the door panel off since it will undoubtedly mean I have a squeak after (a la Murphy...).
     
    #3 UltraJetRefill, Feb 19, 2018
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    111,169
    50,602
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    agree with mendel. put 'em in a jar with a label, but ignore them until something becomes obvious.
     
    #4 bisco, Feb 19, 2018
    kithmo, RCO, Tande and 1 other person like this.
  5. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,045
    7,588
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    They look like self-drilling metal screws (which are great for drilling plastic too. As suggested, could have come from anywhere. Someone else had the same last year, think they worked out it belonged to a temporary security system installed by the dealer while their car was on the lot - removed at sale, but screw was left on floor.

    If it was from the door panels, a tint installer might have been like you "can't find that screw" and grabbed another two from the bench dropping one of them in the darkness too.

    upload_2018-2-20_10-6-26.png
     
    #5 alanclarkeau, Feb 19, 2018
    RCO likes this.
  6. padroo

    padroo Senior Member

    Joined:
    Jan 11, 2008
    2,763
    2,251
    13
    Location:
    Chesterton, Indiana Another third world country.
    Vehicle:
    2016 Prius
    Model:
    Four
    It's not unusual to find a few loose screws in new cars. Those are the self tapping variety with the washer head.
     
    #6 padroo, Feb 19, 2018
  7. Lucifer

    Lucifer Senior Member

    Joined:
    Aug 23, 2015
    1,014
    486
    0
    Location:
    Nh
    Vehicle:
    2017 Prius Prime
    Model:
    Plug-in Advanced
    I would definitly use the top picture one to secure a wood stove or pellet stove chiminiea pipe in place, the bottom one is also a canidate but for some sort of cast iron flange, Toyota uses plastic screws for plastic trim, if you have an illiminated door sill plate that's black and is missing iron screws, na, they would be aluminum.
     
    #7 Lucifer, Feb 19, 2018
  8. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,045
    7,588
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    Check with a magnet - it could be aluminium).
     
    #8 alanclarkeau, Feb 20, 2018
    UltraJetRefill likes this.
  9. UltraJetRefill

    UltraJetRefill Member

    Joined:
    Dec 11, 2017
    155
    93
    0
    Location:
    Tucson, AZ
    Vehicle:
    2017 Prius
    Model:
    Two
    That's a definite possibility. My previous car had something like that installed. I'll have a look under the steering wheel area and see if there are any holes missing a screw. I'm really just curious at this point.
     
    #9 UltraJetRefill, Feb 20, 2018
    RCO likes this.
  10. UltraJetRefill

    UltraJetRefill Member

    Joined:
    Dec 11, 2017
    155
    93
    0
    Location:
    Tucson, AZ
    Vehicle:
    2017 Prius
    Model:
    Two
    Both are attracted to neodymium magnets.
     
    #10 UltraJetRefill, Feb 20, 2018
    Prodigyplace and alanclarkeau like this.
  11. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,045
    7,588
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    If you don't find anything easily, I wouldn't worry too much - could have fallen out of the pocket of any of the people who drove your car in transport transfers, or a mechanic doing a pre-delivery.
     
    #11 alanclarkeau, Feb 20, 2018
    UltraJetRefill likes this.
  12. RCO

    RCO Senior Member

    Joined:
    Aug 31, 2016
    3,709
    5,185
    0
    Location:
    Cornwall
    Vehicle:
    Other Hybrid
    Model:
    N/A
    FWIW, so am I. :sneaky:
     
    #12 RCO, Feb 22, 2018
  13. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    12,285
    11,620
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    Too much iron in the diet? ;)
     
    #13 Prodigyplace, Feb 22, 2018
    RCO likes this.
  14. alanclarkeau

    alanclarkeau Senior Member

    Joined:
    Feb 24, 2016
    7,045
    7,588
    0
    Location:
    near Brisbane, Australia
    Vehicle:
    2016 Prius
    Model:
    N/A
    Are you sure it would pick up an aluminium screw? Not from what I read.

    I've got some very strong magnets from out of a microwave oven, and they won't pick up anything aluminium. BUT - they will cause micro-movement of aluminium foil.
     
    #14 alanclarkeau, Feb 22, 2018
  15. UltraJetRefill

    UltraJetRefill Member

    Joined:
    Dec 11, 2017
    155
    93
    0
    Location:
    Tucson, AZ
    Vehicle:
    2017 Prius
    Model:
    Two
    Sorry, I should have clarified. They are strongly attracted to these magnets. I think they're definitely not aluminium.
     
    #15 UltraJetRefill, Feb 22, 2018
  16. RCO

    RCO Senior Member

    Joined:
    Aug 31, 2016
    3,709
    5,185
    0
    Location:
    Cornwall
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I wished! It's mostly oxidised to trust now. :ROFLMAO:
     
    #16 RCO, Feb 22, 2018
    kithmo, pilotgrrl and Prodigyplace like this.
  17. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    12,285
    11,620
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    auto-correct strikes again! :LOL:;)
     
    #17 Prodigyplace, Feb 22, 2018
    kithmo and RCO like this.
  18. RCO

    RCO Senior Member

    Joined:
    Aug 31, 2016
    3,709
    5,185
    0
    Location:
    Cornwall
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Doh! :mad:
     
    #18 RCO, Feb 23, 2018
    kithmo and Prodigyplace like this.
  19. kithmo

    kithmo Couch Potato

    Joined:
    Apr 25, 2010
    2,404
    2,774
    47
    Location:
    South Yorkshire, UK
    Vehicle:
    2016 Prius
    I think some on here have a few loose screws (me included) :LOL:
     
    #19 kithmo, Feb 24, 2018
    pilotgrrl and Prodigyplace like this.
  20. kithmo

    kithmo Couch Potato

    Joined:
    Apr 25, 2010
    2,404
    2,774
    47
    Location:
    South Yorkshire, UK
    Vehicle:
    2016 Prius
    Aluminium is diamagnetic i.e. slighly repels a magnetic field. The magnetic field will go around it, rather than through it.
     
    #20 kithmo, Feb 24, 2018
    alanclarkeau, RCO, pilotgrrl and 1 other person like this.
(You must log in or sign up to post here.)
Page 1 of 2