Red Triangle, orange emblem, (!), and CEL issue on 2008

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by knettle3, Oct 28, 2017.

Page 2 of 2
  1. TMR-JWAP

    TMR-JWAP Senior Member

    Joined:
    Aug 12, 2016
    6,404
    6,073
    0
    Location:
    Columbia, SC
    Vehicle:
    2007 Prius
    Model:
    Touring

    Why not just purchase a Mini-VCI that is compatible with Windows 10? I did, and it's working perfectly fine. Post 24 in this thread has the information from when I ordered mine on ebay. I've used it hundreds of times and it hasn't let me down yet. Just remember to disconnect from any wireless signals prior to connecting to the car, otherwise the software will try to update and it will lock on the update screen.

    Just Another HV Battery Thread and Experiments | Page 2 | PriusChat
     
    #21 TMR-JWAP, Oct 30, 2017
    knettle3 likes this.
  2. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    8,020
    4,061
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    Are you sure you are looking at the freeze frame data (i. e. you clicked the snowflake icon), and not live data?
     
    #22 dolj, Oct 30, 2017
    knettle3 likes this.
  3. knettle3

    knettle3 Junior Member

    Joined:
    Apr 12, 2016
    38
    14
    0
    Location:
    zachary
    Vehicle:
    2008 Prius
    Model:
    II
    TMR-JWAP...The ones I looked at on Amazon that were compatible were out of stock. I'm gonna pull up your post that you just mentioned. It seems that nearly all of the devices advertised on Amazon were only compatible with 32 bit versions of Win 7 or XP; I must admit that I haven't looked on E-bay (yet). Thank you for the additional information. I would much rather find a device that can run as-is on this laptop without modifying it or trying to find an obsolete machine that's running XP or Win 7.
     
    #23 knettle3, Oct 30, 2017
  4. knettle3

    knettle3 Junior Member

    Joined:
    Apr 12, 2016
    38
    14
    0
    Location:
    zachary
    Vehicle:
    2008 Prius
    Model:
    II
    Dolj....... The pics of all freeze frame values are on page 1 of this thread #11 message. Definitely the freeze frame data according to the scanner. I went and pulled it up again to make sure, since the device was updated yesterday at the Harbor Freight site. I'm working on getting a Mini-VCI now to gather the INF code. Thanks for following this thread; I need all ideas and possibilities!
     
    #24 knettle3, Oct 30, 2017
    DLC82SV likes this.
  5. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    8,020
    4,061
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    That is the FFD for the P0A90. If you have cleared the codes and the C1241 has not come back, then you will not have the data to look at, unless you saved the data (if your scanner is capable of that). Another thing to bear in mind, you said you replaced the 12 V battery 9 months ago and the C1241 might have been thrown from when you had a bad battery, depending on how you went about replacing the battery. That is, if you removed the old battery without a backup power source connected, the code will be from your new battery as removing the power will have reset this code. Not all codes are reset on loss of power, notably ABS and Brake codes.
     
    #25 dolj, Oct 30, 2017
  6. DLC82SV

    DLC82SV Member

    Joined:
    Jul 16, 2018
    241
    119
    0
    Location:
    81212
    Vehicle:
    2008 Prius
    Model:
    ----USA----
    Yes, or you can install and execute the operating system in a virtual environment.

    Installing an operating system on a virtual machine


    Posted via the PriusChat mobile app.
     
    #26 DLC82SV, Aug 20, 2018
(You must log in or sign up to post here.)
Page 2 of 2