1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Rear 12v Outlet Panel

Discussion in 'Prius v Accessories and Modifications' started by wjm, Sep 22, 2017.

  1. wjm

    wjm New Member

    Joined:
    Sep 22, 2017
    4
    0
    0
    Location:
    Florida
    Vehicle:
    2012 Prius v wagon
    Model:
    III
    How do I remove the 2012 Prius V rear 12v outlet panel without scratching things up? I've tried gently wedging in a screw driver around the edges, but have been unwilling to put enough force on it to risk marring the plastic. Is there a hidden catch or some such?

    Thanks.
     
    #1 wjm, Sep 22, 2017
  2. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,036
    1,110
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    Remove the rear lamp access panel, reach behind the shroud and pinch the outlet housing, releasing the retention prongs?
     
    #2 Air_Boss, Sep 22, 2017
  3. wjm

    wjm New Member

    Joined:
    Sep 22, 2017
    4
    0
    0
    Location:
    Florida
    Vehicle:
    2012 Prius v wagon
    Model:
    III
    Sadly, that won't work. The lamp is on the left side of the car while the outlet is on the right. My arm isn't long enough for that!
     
    #3 wjm, Sep 22, 2017
  4. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,036
    1,110
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    I was speaking of the rear (tail) lamp access panel (left and right sides). But the result may be the same.
     
    #4 Air_Boss, Sep 23, 2017
  5. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,268
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    There are six hidden claws. Toyota’s Repair Manual (available by subscription to techinfo.toyota.com) suggests, for removal of the Rear Deck Trim Cover (the trim panel with the power outlet), to use a moulding remover to disengage them.

    Molding removers are made of plastic or nylon and have a lever shape with a wide blade. You still have to be careful, but damage is much less likely than with a screwdriver, putty knife, or other metal tools.

    Toyota sells a four-piece Moulding Remover Set (09061-1C300; ¥5,170), shown in the Repair Manual and very similar to the Kyoto Tool Co. ATP2014, but there’s no need for such extravagance—a set like the Neiko 20598A, sold at Amazon.com for about $10, would probably work just as well.
     
    #5 Elektroingenieur, Sep 23, 2017
    SnoozinJTD likes this.
  6. wjm

    wjm New Member

    Joined:
    Sep 22, 2017
    4
    0
    0
    Location:
    Florida
    Vehicle:
    2012 Prius v wagon
    Model:
    III
    I suspected something of this sort. Perhaps next time I'm at the Toyota shop for something, I'll ask them to remove it for me. I'm assuming it's trivial to pop it off once one has seen how the catches are arranged.

    Thanks.
     
    #6 wjm, Sep 23, 2017
  7. wjm

    wjm New Member

    Joined:
    Sep 22, 2017
    4
    0
    0
    Location:
    Florida
    Vehicle:
    2012 Prius v wagon
    Model:
    III
    Yeah, the outlet is too far forward to reach from back there. Up above the wheel well.
     
    #7 wjm, Sep 23, 2017
  8. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,036
    1,110
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    So you'll have to go the trim removal tool route. From experience, choose a warm day.
     
    #8 Air_Boss, Sep 23, 2017
(You must log in or sign up to post here.)