1. Attachments are working again! Check out this thread for more details and to report any other bugs.

check engine with correct scanner?

Discussion in 'Prius c Technical Discussion' started by tnt4him, Sep 13, 2017.

  1. tnt4him

    tnt4him Junior Member

    Joined:
    Oct 2, 2015
    50
    10
    0
    Location:
    Beaverton Oregon
    Vehicle:
    2012 Prius c
    Model:
    Four
    My check engine light came on, so I scanned to see what my trouble code was. I was shocked that 6 codes came up: 0011, 0002, 0100, 0500, 0020, 0200 I researched each one and found that a lot of them are about open or shorted circuits. However, the car runs fine and being a bit mechanical I know that the car would not run with some of these codes. My question is with the Prius C does it need to be scanned with a special scanner and not the OBDII scanner that I have?

    2012 Prius C 31K
     
    #1 tnt4him, Sep 13, 2017
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,049
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    it's probably your gas cap. but yes, prius needs a prius aware scanner. what are you using?
     
    #2 bisco, Sep 13, 2017
  3. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,150
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    Gas cap code should be a p410/p411, something around those numbers. You can check it with a normal scanner... ask me how I know. :(
     
    #3 ztanos, Sep 14, 2017
  4. tnt4him

    tnt4him Junior Member

    Joined:
    Oct 2, 2015
    50
    10
    0
    Location:
    Beaverton Oregon
    Vehicle:
    2012 Prius c
    Model:
    Four
    How do I check with the OBDII scanner (the normal scanner)?
     
    #4 tnt4him, Sep 14, 2017
  5. tnt4him

    tnt4him Junior Member

    Joined:
    Oct 2, 2015
    50
    10
    0
    Location:
    Beaverton Oregon
    Vehicle:
    2012 Prius c
    Model:
    Four
    I did have 410 and 411 earlier and replaced the fuel cap. These new ones are all about timing and circuits which leads me to believe my scanner is not reading correctly.
     
    #5 tnt4him, Sep 14, 2017
  6. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,150
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    You plug the OBDII scanner into the OBDII port under the dash.
     
    #6 ztanos, Sep 15, 2017
  7. tnt4him

    tnt4him Junior Member

    Joined:
    Oct 2, 2015
    50
    10
    0
    Location:
    Beaverton Oregon
    Vehicle:
    2012 Prius c
    Model:
    Four
    thanks.
     
    #7 tnt4him, Sep 15, 2017
(You must log in or sign up to post here.)