1. Attachments are working again! Check out this thread for more details and to report any other bugs.

need some maintenance opinions, please

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by cutter44, Jul 9, 2017.

  1. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,164
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    they should have stuck with rear drums like gen 2. you hardly ever read about rear brake problems. who needs rear discs? it's a prius!:rolleyes:
     
    Mendel Leisk likes this.
  2. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,150
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    PC has rear drums.
     
    Mendel Leisk likes this.
  3. Sean Nelson

    Sean Nelson Active Member

    Joined:
    Dec 30, 2014
    421
    182
    0
    Location:
    Vancouver, BC Canada
    Vehicle:
    2012 Prius c
    Does the opening the driver door actually apply hydraulic pressure to the calipers? I always thought it was just priming the brake booster, which I think of as a vacuum-assist mechanism like that on ICE cars, but primed using an electric pump.
     
    #23 Sean Nelson, Jul 11, 2017
    Last edited: Jul 11, 2017
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,690
    39,236
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I've only a fuzzy idea of what's happening, but there have been reports here, of pistons being pushed out, when the driver's door was opened, and whatever's going on activated.

    It is a bit irritating dealing with the aftermath of a battery disconnect. Apart from lost memories, I've noticed an odd revving up, the first couple of startups afterwards, like the car needs to recalibrate something. But I think that's preferable to the possible problems, if the system activates.

    Some DIY'rs I believe have left the 12 volt connected, and have just been careful not to open the drivers door, and for sure do not start the car till your completely done and have done brake pedal pushes, take up any excess travel.
     
    ztanos likes this.
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,690
    39,236
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Should add: if you leave the battery connected, you REALLY want to fool-proof the driver's door, prevent absentminded opening.

    @NutzAboutBolts IIRC taped it shut, with coloured tape.
     
    ztanos likes this.
  6. cutter44

    cutter44 Member

    Joined:
    Apr 19, 2015
    213
    54
    0
    Location:
    MA
    Vehicle:
    2012 Prius c
    Model:
    Four
    I'd like to think a Toyota dealer would know all this stuff and do it properly, but after reading all this, I'm starting to think I'm better off just waiting until I notice issues rather than preemptively having brake work done. :)
     
  7. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,690
    39,236
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    They should know their stuff. Maybe ask if they work on Prius brakes? While hooked up to a polygraph...
     
  8. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,150
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    But only if your drivers door is not opened. :ROFLMAO:
     
    Mendel Leisk likes this.