Hybrid Cell Voltage

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by Ralvals, Jun 4, 2017.

Tags:
Page 1 of 4
  1. Ralvals

    Ralvals Junior Member

    Joined:
    Jun 4, 2017
    15
    7
    0
    Location:
    Vladivostok
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Hello everyone!
    I have a problem with my Prius 2012 plug-in. Yesterday after 1-2 miles my car stopped and showed a yellow triangle.
    The transmission of the vehicle can not move to "N" from "P".
    The error codes that the scanner P1A00 P1A61 P1A64 P1A67 P301A P31AB showed
    Hybrid Battery Cell Low Voltage Stack "B"
    Hybrid Battery Cell Low Voltage Stack "C"
    Hybrid Battery Cell Low Voltage Stack "D"
    The voltage on all cells of the battery is the same 3.73v.
    Also checked the fuse 150a

    Please need help! Errors are not reset and the machine does not start !!
     
    #1 Ralvals, Jun 4, 2017
    Paul Root likes this.
  2. mrbigh

    mrbigh Prius Absolutum Dominium

    Joined:
    Sep 6, 2005
    3,686
    699
    2
    Location:
    Long Island, NY
    Vehicle:
    Other Electric Vehicle
    How many miles on it?
     
    #2 mrbigh, Jun 4, 2017
  3. IMkenNY

    IMkenNY Im just being nosy

    Joined:
    Mar 10, 2012
    477
    303
    6
    Location:
    Tropical Buffalo NY
    Vehicle:
    2012 Prius
    Model:
    Four Touring
    Try a reboot by disconnecting the 12v battery and reconnecting. I would measure the 12v while your back there.
     
    #3 IMkenNY, Jun 4, 2017
  4. Ralvals

    Ralvals Junior Member

    Joined:
    Jun 4, 2017
    15
    7
    0
    Location:
    Vladivostok
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    36700
    Did it. No result
     
    #4 Ralvals, Jun 4, 2017
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,444
    50,202
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    welcome!
    where is V, and what are you reading the codes with?
     
    #5 bisco, Jun 4, 2017
  6. IMkenNY

    IMkenNY Im just being nosy

    Joined:
    Mar 10, 2012
    477
    303
    6
    Location:
    Tropical Buffalo NY
    Vehicle:
    2012 Prius
    Model:
    Four Touring
    Reboot but before you attempt to start the Prius try to give the traction battery a charge with your evse cable.
     
    #6 IMkenNY, Jun 4, 2017
  7. Ralvals

    Ralvals Junior Member

    Joined:
    Jun 4, 2017
    15
    7
    0
    Location:
    Vladivostok
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Vladivostok. The programm is called Techstream
     
    #7 Ralvals, Jun 4, 2017
    bisco likes this.
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,444
    50,202
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    thanks, that is the correct software. how is the health of the 12 volt battery?
     
    #8 bisco, Jun 4, 2017
  9. Ralvals

    Ralvals Junior Member

    Joined:
    Jun 4, 2017
    15
    7
    0
    Location:
    Vladivostok
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    14v
    doesn't work, not charging.
     

    Attached Files:

    #9 Ralvals, Jun 5, 2017
  10. Ralvals

    Ralvals Junior Member

    Joined:
    Jun 4, 2017
    15
    7
    0
    Location:
    Vladivostok
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Also i have other photo with Techstream
     

    Attached Files:

    #10 Ralvals, Jun 5, 2017
  11. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    11,883
    11,418
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    Did you check the 12 volt battery with the car off after it has not been used for a time?
    If you check when in Ready mode you will read the 14 volts from the inverter that charges the 12 volt battery.
    A good battery usually reads between 12 and about 13.5 volts if I recall correctly.
     
    #11 Prodigyplace, Jun 5, 2017
  12. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,517
    14,129
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    It looks like the ground fault interrupter on your EVSE tripped. Does it reset?
     
    #12 jerrymildred, Jun 5, 2017
    Last edited: Jun 5, 2017
    Prodigyplace likes this.
  13. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,444
    50,202
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    is there anything unusual about this car, accidents and etc.? have you owned it since new?
     
    #13 bisco, Jun 5, 2017
  14. Ralvals

    Ralvals Junior Member

    Joined:
    Jun 4, 2017
    15
    7
    0
    Location:
    Vladivostok
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Yes, sorry. Without charging 12.1v
    Used car. The car was hit on the front right side but not too much.
    I press reset and then test but nothing changes.
     
    #14 Ralvals, Jun 6, 2017
  15. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,444
    50,202
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    have you tried a public charger?

    12 volt is low, especially considering that it gets charged every time you charge the hybrid battery.
     
    #15 bisco, Jun 6, 2017
  16. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    11,883
    11,418
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    If you have a GFCI (gound fault) receptacle, they tend to go bad over time.
    Have you tried plugging in a lamp to see is power is reaching your EVSE?
     
    #16 Prodigyplace, Jun 6, 2017
  17. Ralvals

    Ralvals Junior Member

    Joined:
    Jun 4, 2017
    15
    7
    0
    Location:
    Vladivostok
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Our country don't have public chargers.
    I think my 12 volt battery don't charging from the inverter because i don't hear the sound of
    triggering relay ((3) on scheme). Also in power cable connecting place to traction battery there is no voltage.
    More in detail please.
     

    Attached Files:

    #17 Ralvals, Jun 7, 2017
    bisco and Mwoo30 like this.
  18. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    11,883
    11,418
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    I meant plug a lamp into the 120 volt receptacle you use for the charger to verify electricity is being provided to your charger.
     
    #18 Prodigyplace, Jun 7, 2017
  19. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,444
    50,202
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    does it run in hv mode, or not run at all? if the 12v isn't charging, test the voltage after it has been off for a few hours, trickle charge it, test again after a few hours. if it is 12+ try starting the car.
     
    #19 bisco, Jun 7, 2017
  20. Ralvals

    Ralvals Junior Member

    Joined:
    Jun 4, 2017
    15
    7
    0
    Location:
    Vladivostok
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    My problem in this video

    I tried with other 12v battery.
     
    #20 Ralvals, Jun 13, 2017
    Last edited: Jun 13, 2017
(You must log in or sign up to post here.)
Page 1 of 4