Limo Tint?

The law will vary by Province Glass/Window Tinting – AAA Digest of Motor Laws

 

if you get a ticket for too dark tint, its really difficult to remove the tint. you might want to rig some shades or simply cut out some cardboard to block the windows.

 

There is a electric tint can get dark to light ... Do you have it in USA ??

Posted via the PriusChat mobile app.

 

not that I know of, but if it didn't cost a small fortune it would be way cool.

 

If seems to exist, I bet white lacks the cool factor ricers want, it does not sound cheap in the ad.

The windows use 70V AC, but have transformers from 12 volts DC and 110 volts AC. Windows are in parallel, not series.
Smart Tint ® Smart Film ™ USA Factory Direct Wholesale

 

@JimboPalmer curious about your tint brand you have shared. When viewing from the inside of the car will it give a darker view at night or cloudy days? Reason I ask is 08' s have a blind spot from the design of the interior and tinting is something I want to do but hesitant with the safety while driving. I wanted to tint dark like oil_burner but realized how much this became a safety issue rather a privacy one.

Posted via the PriusChat mobile app.

 

Yes i had cheap tint applied, as it was my work car so i wss not out much at night. When i was, it was no problem as i was legal in MS, 30% allowed through. It cooled the car

 

Limo tint on all rear windows, 35% on drivers and passengers front windows, and a limo tint eyebrow.
I did the research and asked the Washington State patrol to make sure it was legal. I ordered the black box window tint, Lazer precut film from eBay. It has been on for over a year now and I love it.

Posted via the PriusChat mobile app.

 

Sorry for the upside down pictures. I am new to posting pictures.

Posted via the PriusChat mobile app.

 

I have the tiny window panes that are in front of the front windows and behind the rear windows tinted to 5%. If you have a laptop on, someone will still be able to see it through the window at night.

The rest of my windows are tinted to 35% to be legal in my state. When I sleep in my Prius I use cardboard pieces that I cut to fit my windows covered with black felt. They're sized so I just need to push them into the windows. With these on and a sunshield on the front window, you can't see in the car at night, and it just looks like my windows are darkly tinted if you look closely. I'd recommend using a similar system and then tinting to the max legal amount allowed by your state. With a tint on the windows, it's really hard to tell there are curtains or anything behind the tint if the material is black.

 

As far as I know 35% is the law. I too am from Washington State. The state troopers have a tool to measure the tint. Usually people do 20% on the rear window and 35% on all the other windows hoping that they will check only the side windows and not the back window. This means only 35% of visible light passes through, the rest is blocked. Limo Tint is somewhere around 10%

 

Hey Kevin, this is what I'm trying to do with mine, how did you do the tint, did you take the windows out? Or are they easy to do in situ with a lot of patience? I've looked for instructions on how to remove them but couldn't find any :-(

 

I flipped over Dan's picture. Nice looking tint.

 

You never have to take the windows out to tint. You just clean the windows really well and then apply the tint from the inside (watch lots of tutorials on youtube prior to attempting!). I bought a pre-cut kit off of ebay to tint my windows, to remove cutting steps which are really easy to mess up if you just buy a roll of tint. Following online tutorials, I was able to tint all of my windows successfully with no prior experience, except the large top trunk window. For it, I didn't shrink it properly, so I ended up with creases, and had to abandon it and throw that tint away. I just used pre-cut tints off ebay, a blow dryer, and a tint tool kit (paid ~$20 off amazon). You have a high chance of being able to tint everything yourself if you're good with tools, except the top rear trunk window. For that you really need to have good prior tinting experience and know how to perfectly shrink the tint. The size and amount of curvature of each window significantly affect the difficulty of getting the tint right.

For me I still saved a lot of money doing it myself, even though I needed to take my car to a shop just to get the rear window done.

 

Thanks for the reply Kevin. I have indeed got my hands on some pre-cut tint, I'll order the tools now and give it a bash, apart from the boot/trunk window, might see if I can outsource that bit.

Cheers

 

Good luck! I recommend starting with the small windows first and then learn from your mistakes and improve as you do the larger windows.