1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2007 Prius... brake actuator or other issue?

Discussion in 'Newbie Forum' started by nicholas.prete, Apr 30, 2017.

Tags:
Page 1 of 2
  1. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    Hey everyone! I have a 2007 Prius with about 140k, and I was wondering if anyone could help. Lately, the brake pump has been making a lot more frequent pumps than usual. It's even if I'm not stepping on the brake. There are no lights on the dash but my mechanic used his ODB reader to get the code C1300, which apparently has something to do with the ABS system. Could this be the brake actuator? This is covered under extended warranty until the end of this year, according to Toyota. If anyone could give me any advice that'd be great. Attached below is a photo of the code. Thanks!
     

    Attached Files:

    #1 nicholas.prete, Apr 30, 2017
    cosminman and RCO like this.
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    welcome!
    is the fluid level okay?
     
    #2 bisco, Apr 30, 2017
  3. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,518
    14,128
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    From what I've read, it's a fault in that ECU. But I can't say that it doesn't relate to the pump as well. If the fluid level is OK, it sounds like a trip to the dealer is in order. Hope you have a good one available. When my pump was acting up, it was only while pressing the brake pedal.
     
    #3 jerrymildred, Apr 30, 2017
    RCO likes this.
  4. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    Could it be the fluid level that's triggering it? Would it be normal with no lights on the dash?
     
    #4 nicholas.prete, Apr 30, 2017
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    no idea, but it's easy enough to check.
     
    #5 bisco, Apr 30, 2017
    jerrymildred and RCO like this.
  6. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    I checked the brake fluid. It seems okay. I don't really know what to look for other than the fact that it's pink and filled to near where the cap was. Any other things to look for?
     
    #6 nicholas.prete, May 1, 2017
  7. Beachbummm

    Beachbummm Senior Member

    Joined:
    Sep 12, 2013
    1,160
    392
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Five
    PINK? I think you're checking the invertor coolant...Ive never seen pink brake fluid
     
    #7 Beachbummm, May 1, 2017
    RCO likes this.
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    the o/m shows where and what all the reservoirs are. there should be min/max markings on the side.
     
    #8 bisco, May 1, 2017
    RCO and nicholas.prete like this.
  9. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    So. You're right. I checked the actual brake fluid (light brown) and it was fine.
     
    #9 nicholas.prete, May 2, 2017
    bisco likes this.
  10. Beachbummm

    Beachbummm Senior Member

    Joined:
    Sep 12, 2013
    1,160
    392
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Five
    should be clear, they will change it when they fix the brakes..
    expect a bill of around a grand ...
    prius is a great car but when they fail they fail BIG
     
    #10 Beachbummm, May 2, 2017
  11. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    $1,000 to get rear drums..? That's what I'm sure I need.
     
    #11 nicholas.prete, May 2, 2017
    bisco likes this.
  12. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    Or, the ECU. Which still sort of confuses considering there still isn't a dashboard light that comes on yet the ODB reader gives me that code.
     
    #12 nicholas.prete, May 2, 2017
    RCO likes this.
  13. Beachbummm

    Beachbummm Senior Member

    Joined:
    Sep 12, 2013
    1,160
    392
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Five
    I don't see how rear drums will cause an error code in the computer.... but if that's what they told you go for it..good luck, let us know when its fixed
     
    #13 Beachbummm, May 2, 2017
    RCO likes this.
  14. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    That's the weird thing - there are no dashboard lights. Just my mechanics ODB2 reader. It could possibly be a cleared code or something. I mostly want to rule out the brake actuator (and if it is that, I'd want to get to Toyota before the end of the year warranty enhancement is over). I'm also afraid if I take it into Toyota and they don't find anything wrong that's covered under "warranty enhancement" it'll be upwards of $200 for a diagnostic fee which is something I'd prefer not to waste just on a diagnosis.
     
    #14 nicholas.prete, May 2, 2017
  15. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,302
    4,241
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Sounds like the brake actuator is losing pressure. Save your money and wait until you see the brake system warning lights 'BRAKE, ((!)), ABS and VSC' then take corrective action, unless you have safety concerns about your braking system.

    Have you noticed a decrease in your MPG or is the regenerative braking no longer working?
     
    #15 SFO, May 2, 2017
  16. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    I guess I've noticed a slight decrease since I bought the car used last year. The only thing I'm afraid is the brake actuator failing AFTER the warranty enhancement at the end of the year.
     
    #16 nicholas.prete, May 2, 2017
  17. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,302
    4,241
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    Reasonable concern and does sound like many other Gen2 owners (including myself).

    If the MPG decrease was greater (or regen wasn't working properly) then you could try doing a Linear Solenoid initialization/calibration and see if that helps, my guess is it won't though.
     
    #17 SFO, May 2, 2017
  18. nicholas.prete

    nicholas.prete New Member

    Joined:
    Apr 30, 2017
    17
    6
    0
    Location:
    Philadelphia
    Vehicle:
    2007 Prius
    Model:
    N/A
    Yeah. I think I'm going to monitor it for the next few months or so and if it gets any worse (and there are still no lights on the dash) I might just bite he bullet and take it to the dealer. Although, from my understanding, don't the lights have to be on for them to service it under warranty?
     
    #18 nicholas.prete, May 2, 2017
  19. jerrymildred

    jerrymildred Senior Member

    Joined:
    Oct 28, 2016
    11,518
    14,128
    0
    Location:
    Tampa, FL
    Vehicle:
    2017 Prius
    Model:
    Two
    The dealer told me it didn't matter how noisy it was, Toyota would not reimburse them for replacement unless it actually gave a code. And I assume a code would most likely trigger a light. :cry:

    Edit to add: the main reason I got rid of my '05 and upgraded to the PiP was a noisy, sluggish actuator that wouldn't throw a code. I was concerned as you are that it would outlast the warranty and then die. But I didn't want to throw that much money it a 12 year old car. It was going to be pretty expensive, plus needing a water pump.
     
    #19 jerrymildred, May 2, 2017
  20. SFO

    SFO Senior Member

    Joined:
    Feb 7, 2017
    5,302
    4,241
    0
    Location:
    Northern California
    Vehicle:
    2007 Prius
    Model:
    N/A
    #20 SFO, May 2, 2017
    Last edited: May 2, 2017
    nicholas.prete likes this.
(You must log in or sign up to post here.)
Page 1 of 2