LH Fog/Driving Lens Broken, Need To Replace, Or Upgrade

Going to remove the bumper cover and replace them that way. Now, I was thinking, what would I have to tie into to be able to turn on the foglights as I would the head lights? (As soon as you turn on the car) I know there's a hot wire going to the steering column switch and was curious how that could be done. It would have to be tied into the back of the foglight switch, and the original "hot wire" capped off.
Too involved? Best to leave well enough alone?

 

Replaced foglights. Removal of bumper cover a little different than the DYI, but not by much. Recommend removing all fasteners for under hood plastic plate-it's just easier. On the 2011 model, there are 3 connectors: the main headlight, and 2 foglight. I don't recommend the LEDs, they throw out even less light than factory lights. Will probably get the good $140 set.