1. Attachments are working again! Check out this thread for more details and to report any other bugs.

A good way to clean out grungy air-inlet vents?

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by davide, Jun 25, 2015.

  1. davide

    davide Junior Member

    Joined:
    Jul 30, 2006
    86
    9
    0
    Location:
    suburban Detroit
    Vehicle:
    2012 Prius c
    Model:
    Two
    I have to park outside, & haven't been going to the car-wash frequently, so a mix of decayed leaves, twigs, bird doo & dirt has accumulated in the foot-long air-inlet vents just below the windshield (not the wider set of vents closer to the hood) . So today I used a tweezers to clean out quite a bit--pouring on some water helped--but some grunge still remains down in the vents.
    My plan: go to the car-wash & ask the guy with the high-pressure hose to spray into that foot-long vent area for a good 5-10 seconds to flush it out. Is this a good idea?
     
    #1 davide, Jun 25, 2015
  2. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I vote no.
     
    #2 Mendel Leisk, Jun 25, 2015
  3. orenji

    orenji Senior Member

    Joined:
    Aug 17, 2013
    5,884
    3,486
    0
    Vehicle:
    2010 Prius
    Model:
    Three
    Don't think that will help. There was a post on Priuschat on how someone took the plastic cover off to clean the screen. I would try blowing it out with compressed air or as you have been doing it with tweezers and maybe a paint brush to clean it out.
     
    #3 orenji, Jun 25, 2015
  4. ufourya

    ufourya We the People

    Joined:
    Aug 20, 2008
    1,258
    336
    42
    Location:
    Texas
    Vehicle:
    2012 Prius c
    Model:
    Two
    I would vacuum. It seems to me you'd want to get the debris out, not force it in.
     
    #4 ufourya, Jun 26, 2015
    Mendel Leisk likes this.
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    vacuum and plucking. maybe cover them when parked?
     
    #5 bisco, Jun 26, 2015
  6. ETC(SS)

    ETC(SS) The OTHER One Percenter.....

    Joined:
    Oct 28, 2010
    7,856
    6,658
    0
    Location:
    Redneck Riviera (Gulf South)
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Concur.


    +1

    Bisco has the right approach.
    Clean, then find a way to cover the vent.
    You might be able to loosen debris with a clothes dryer brush.

    Buy a sun-shade and stop parking under trees.
     
    #6 ETC(SS), Jun 26, 2015
  7. orenji

    orenji Senior Member

    Joined:
    Aug 17, 2013
    5,884
    3,486
    0
    Vehicle:
    2010 Prius
    Model:
    Three
    Vacuuming does not work, tried it already. The screens are down to low and too wide to make any good suction.
     
    #7 orenji, Jun 26, 2015
  8. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Press some masking tape onto the screen, then peel off?

    Then, there's this stuff, hehe. Might backfire tho:

    image.jpg image.jpg
     
    #8 Mendel Leisk, Jun 26, 2015
    bisco likes this.
  9. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    ghostbusters?
     
    #9 bisco, Jun 26, 2015
  10. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Hey, it's "Swiss Formula". :rolleyes:
     
    #10 Mendel Leisk, Jun 26, 2015
  11. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    swiss slime? i'll stick with their cheese.:p
     
    #11 bisco, Jun 26, 2015
  12. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Well, it looks like radioactive yogurt...
     
    #12 Mendel Leisk, Jun 26, 2015
  13. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    exactly.
     
    #13 bisco, Jun 26, 2015
  14. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I tried the CyberClean, actually worked quite well, and didn't stick or get hung up in the mesh.

    Before:

    image.jpg
    Not much, but anyway.

    image.jpg image.jpg image.jpg
     
    #14 Mendel Leisk, Jun 26, 2015
  15. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    mendel, you've been slimed!:eek:
     
    #15 bisco, Jun 26, 2015
    Mendel Leisk likes this.
  16. orenji

    orenji Senior Member

    Joined:
    Aug 17, 2013
    5,884
    3,486
    0
    Vehicle:
    2010 Prius
    Model:
    Three
    How about Play Do, that may work too!
     
    #16 orenji, Jun 26, 2015
(You must log in or sign up to post here.)