1. Attachments are working again! Check out this thread for more details and to report any other bugs.

prius c loose front fender

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by emily's prius c, May 30, 2015.

  1. emily's prius c

    emily's prius c New Member

    Joined:
    May 30, 2015
    3
    0
    0
    Location:
    MA
    Vehicle:
    2012 Prius c
    Model:
    Two
    I clipped a snow bank this winter and now my front bumper is popped out at the seam on one side. I don't know if it is missing a piece to clip it in place? How would i fix this?

    IMG_4637.JPG IMG_4636.JPG
     
    #1 emily's prius c, May 30, 2015
  2. Super Mario

    Super Mario Member

    Joined:
    Jul 26, 2014
    142
    57
    0
    Location:
    Medford, NY
    Vehicle:
    2012 Prius c
    Model:
    Two
    That looks like the front bumper. If it's the bumper it clips in and if it won't clip in then the clips probably broke and you need to replace them or bring it to get fixed. If that's the fender then yo need to bring it to Toyota or a body shop to fix. Try pushing in on it around the seems where it meets along the bumper and see if it snaps back in
     
    #2 Super Mario, May 31, 2015
  3. Okinawa

    Okinawa Senior Member

    Joined:
    Dec 28, 2013
    1,333
    317
    0
    Vehicle:
    Other Hybrid
    I would take it to a body shop.
     
    #3 Okinawa, May 31, 2015
  4. izzmo

    izzmo New Member

    Joined:
    Dec 17, 2023
    1
    0
    0
    Location:
    Portland
    Vehicle:
    2016 Prius c
    Model:
    Four
    I'll resuscitate this thread, since i have a similar issue. I've been struggling to identify the part number for this clip, which is clearly missing. I found this diagram for the front bumper on lakelandtoyota, but it's not very clear what's what.

    Would appreciate the help tracking down the part! Thanks!

    [​IMG] [​IMG]
    [​IMG] [​IMG]
     
    #4 izzmo, Dec 17, 2023
  5. BiomedO1

    BiomedO1 Senior Member

    Joined:
    Mar 27, 2021
    1,831
    927
    0
    Location:
    SacTown, Ca
    Vehicle:
    2021 Prius Prime
    Model:
    LE
    I believe the part your looking for is #6, in your diagram. Do a very close inspection of the edges of part #1. If the lock points are not intact, ripped out; replacing part #6 won't do you any good.
    I removed part #1 on my old 2012 Prius C, to push out a dent - those lock-tabs are pretty brittle. Try just pushing it back in, to see if it'll locks back into place.

    Good Luck...
     
    #5 BiomedO1, Dec 17, 2023
(You must log in or sign up to post here.)