1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Regenerative Brakes not working after resetting code for CEL

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by Brandonpriusc, May 2, 2015.

  1. Brandonpriusc

    Brandonpriusc New Member

    Joined:
    May 2, 2015
    1
    0
    0
    Location:
    Nashville
    Vehicle:
    2013 Prius c
    Model:
    One
    Hey guys,

    New to the forum and could really use some advice. I have a 2013 prius c with 38,000. Yesterday my CEL came on, so on the way home I ran it by O'Reilys to check the code. The guy at the store said it was gas cap and reset the CEL. Well, as soon as I got back in the car and turn it on the brake light, and traction control light, brake system light, and ABS light came on, and the regenerative braking system is currently not working. The guy at OReillys said there may be a "reset" period after the codes are cleared, but I'm leery, particularly because my brakes are not working like they should. I'm going to take it to the dealership this afternoon, but wanted to get some advice from y'all first to see if this is a common issue. Trying not to spend an arm and a leg at the dealership today...
     
    #1 Brandonpriusc, May 2, 2015
  2. telmo744

    telmo744 HSD fanatic

    Joined:
    Apr 8, 2010
    2,181
    769
    0
    Location:
    Portugal
    Vehicle:
    2010 Prius
    Model:
    N/A
    Any updates on this issue?
     
    #2 telmo744, May 21, 2015
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i've been waiting to hear as well.
     
    #3 bisco, May 21, 2015
  4. Swan0610

    Swan0610 New Member

    Joined:
    Feb 6, 2016
    21
    3
    0
    Location:
    Colorado
    Vehicle:
    2010 Prius
    Model:
    Two
    This is my exact issue, somebody please help if they are able... Thanks!
     
    #4 Swan0610, Apr 13, 2016
  5. Swan0610

    Swan0610 New Member

    Joined:
    Feb 6, 2016
    21
    3
    0
    Location:
    Colorado
    Vehicle:
    2010 Prius
    Model:
    Two
    Did you get to the bottom of this? I used trechatream to do an abs reset because after a (front lifted tow) my traction control light stayed on. Now I have multiple abs/brake indicators glowing and the regenerative brakes don't work, just the mechanical deeper into a brake. Anything I should be doing with trechstream? Thanks!
     
    #5 Swan0610, Apr 13, 2016
  6. telmo744

    telmo744 HSD fanatic

    Joined:
    Apr 8, 2010
    2,181
    769
    0
    Location:
    Portugal
    Vehicle:
    2010 Prius
    Model:
    N/A
    The OP never responded, but his car is a Prius c.
    Have you put a qustion on the right forum (3 Gen) already?
     
    #6 telmo744, Apr 13, 2016
  7. Swan0610

    Swan0610 New Member

    Joined:
    Feb 6, 2016
    21
    3
    0
    Location:
    Colorado
    Vehicle:
    2010 Prius
    Model:
    Two
    I'll do that here shortly... cheers!
     
    #7 Swan0610, Apr 13, 2016
  8. well.rested

    well.rested Junior Member

    Joined:
    Mar 22, 2016
    5
    0
    0
    Location:
    Georgia
    Vehicle:
    2014 Prius c
    Model:
    One
    I'm having precisely the same issue! Any resolution? I haven't gone for the ODB code check yet; trying to figure out how to get my C (2014, no nav) into diagnostic mode, if there is one on this particular model... or just open up the 12v and check it, seems to be the first step.
     
    #8 well.rested, Jun 21, 2016
(You must log in or sign up to post here.)