1. Attachments are working again! Check out this thread for more details and to report any other bugs.

JustDidIt - Modding My 2007....The 2008 Touring died.

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Justdidit, Jul 9, 2012.

  1. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    These? what kind of pictures are you looking for?
     
  2. John Casteel

    John Casteel Junior Member

    Joined:
    Dec 9, 2014
    22
    8
    0
    Location:
    Savannah, ga
    Vehicle:
    2007 Prius
    Model:
    Two
    Yes those, I couldn't figure out how to upload the file. (I figured it out in a different thread that I started.)

    Was looking for a picture of the led unit installed before the translucent cover was replaced and possibly after to see light output.
    Does the 12 smd size fit under the front dome, rear dome and map translucent covers.

    Edit: I just saw your response in the other thread. I look forward to the pictures. Thanks.
     
  3. Daves09prius

    Daves09prius Active Member

    Joined:
    Nov 20, 2010
    680
    161
    0
    Location:
    Gettysburg, PA
    Vehicle:
    2009 Prius
    Model:
    One
    Thanks for that info! I found this video from Chrisfix on YouTube a while ago, he installed his back-up lights pretty much the same way you did.
     
  4. littlehandegan

    littlehandegan Junior Member

    Joined:
    Oct 13, 2014
    80
    14
    0
    Location:
    Charleston, SC
    Vehicle:
    2005 Prius
    Any pics of the headlight retrofit on? Would love a video
     
  5. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    I will try to get some video posts up.

    [​IMG]
     
    habeebo likes this.
  6. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Got new 8" 2'5 ID 6.7kg/mm (380lbs/in) rear Eibach spring and aluminum top hats for my Ground Control coil-over sleeve set! This is slight higher spring rate than the last set of 6.07 kg/mm (340lb/in)

    [​IMG]

    Cant wait to try them out.
     
  7. Daves09prius

    Daves09prius Active Member

    Joined:
    Nov 20, 2010
    680
    161
    0
    Location:
    Gettysburg, PA
    Vehicle:
    2009 Prius
    Model:
    One
    Hey Justdidit! can you post a parts list for your ground control setup (with the new springs you just purchased) It's really time for me to change my struts, and I trust your modding history, so I'd like to match what you've done.

    Do you think your parts would work on a "Base model" Prius, or are they specific to the touring model?
     
  8. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    'ToyotechWV' was the first to install this setup on his 2008 package #2

    My new setup is perfect in my opinion - With 3 additional passengers and luggage, I no longer bottom out.Got the new # GC200.64.67 - 8" tall 2.5" ID 6.7kg/mm (380lbs/in) rear Eibach spring and aluminum top hats installed before my trip to Canada. This is slight higher spring rate than the last set of 6.07 kg/mm (340lb/in) - which is way higher than the spring rate that came with the kit originally - 4.4kg/mm or 246lb/in setup.

    The Ground Control Setup is a Toyota Matrix kit, part # 8070.01 - is probably closely matched for the front of the Prius weight which is why i have never had to change or modify it as is. However the Toyota Matrix doesn't have the large battery to compensate for as the Prius does have, so finding the right spring height and rate took some guesswork. Order directly from GC Part # 8070.01 which includes the front setup which i kept as is, but I had them change the rear setup

    Ground Control Systems, Inc.
    3885 Dividend Dr.
    Shingle Springs, CA 95667
    P - 530-677-8600

    Toyota Matrix kit, part # 8070.01
    Front Springs - (no change)
    Rear Springs - GC200.64.67 (stiffer spring)

    I worked with several different staff members there to get my several custom spring rates. The rear setup in that kit comes with the rear spring # GC200.64.44 and I swapped it with the part # GC200.64.67 ( i suppose the last number means the spring rate. 44 probably means 4.4kg/mm and 67 means 6.7kg/mm) This spring has a higher spring rate to support the weight of the battery AND additional passengers while giving me the drop/look i was going for. Currently the front and rear are at their middle setting and I can raise it or lower it more still.

    The only complaint is that at the current ride height the rear stock strut is very limited in its travel. Meaning i have the car low enough that the strut isn't allowed to travel up and down as much as it was designed for. So far i haven't hurt anything but I know i could blow my struts if I lowered the coil-overs to their lowest setting for a long period of time.

    Hope this helps in some way. Good luck. Feel free to ask me more if needed.

    -JustDidIt (Jeremy)
     
  9. kingnba6

    kingnba6 Active Member

    Joined:
    Mar 17, 2013
    1,018
    242
    0
    Location:
    NY
    Vehicle:
    2013 Prius c
    Model:
    One
    Just to clarify: higher spring rate means it will be able to hold more weight without bottoming out?
     
  10. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    From my experience swapping out the springs several times, yes. I have slowly gone up in spring rate as I was worried that if I made a large jump in spring rate, the 'lowered civic bounce' would appear. So far, the OEM KYB struts have been able to handle the stiffer springs with no loss of control of the spring compression.
     
  11. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Which should i go with? Silver or satin black...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Having new tires mounted and will either peel off the plastiDip... or redo it.
     
    #291 Justdidit, Mar 26, 2015
    Last edited: Jul 28, 2015
    Daves09prius likes this.
  12. ucsbwsr

    ucsbwsr Active Member

    Joined:
    May 28, 2014
    105
    145
    0
    Vehicle:
    2008 Prius
    Model:
    Plug-in Base
    Silver or experiment with a dark bronze or dark gold dip, it could look really good with your paint.
     
  13. sidecar

    sidecar Member

    Joined:
    Dec 29, 2010
    342
    44
    0
    Location:
    Australia
    Vehicle:
    2008 Prius
    Model:
    II
    silver from me
     
  14. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Kinda over the satin black. Possibly silver..or gold plastiDip would look good...or smoked silver plastiDip color similar to my headlights.
     
  15. Corwyn

    Corwyn Energy Curmudgeon

    Joined:
    Mar 6, 2011
    2,171
    659
    23
    Location:
    Maine
    Vehicle:
    2007 Prius
    Model:
    II
    Silver.
    Looking good.
     
  16. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
  17. Glenn Powell

    Glenn Powell Junior Member

    Joined:
    Jan 27, 2015
    1
    0
    0
    Vehicle:
    2008 Prius
    Model:
    Five
  18. ttmt22

    ttmt22 New Member

    Joined:
    Apr 24, 2015
    8
    1
    0
    Location:
    Maryland
    Vehicle:
    2014 Prius Plug-in
    Model:
    Plug-in Base
    I like the black better against the dark grey paint. Did you lower this vehicle at all or you sitting on 19's with 35's without it dropped? I'm trying to figure out the best size wheels/tire combo for my 2014 PiP to fill out the wheel well as much as possible without lowering it. One site wheel fitment site suggests that 20's with 35's would actually fit.
     
  19. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Dropped ~2"-3" ( haven't measured) with 215/35R19 tires - 19x7 wheels - No rubbing at all.

    Not sure what it would look like with 20s and no suspension mods..

    Here is a G2 'Slammed' on 20's beside it is a G2 with 19s
    [​IMG]

    [​IMG]

    Good luck finding a 215/35R20 tire... I could only find a 225/30R20 and this was the size difference

    You MIGHT make it work with no modification to the fenders...

    215/35-19 225/30-20 Difference
    Diameter inches (mm)
    24.93 (633.1) 25.31 (643) 0.39 (9.9) 1.6%
    Width inches (mm)
    8.46 (215) 8.86 (225) 0.39 (10) 4.7%
    Circum. inches (mm)
    78.3 (1988.94) 79.53 (2020.04) 1.22 (31.1) 1.6%
    Sidewall Height inches (mm)
    2.96 (75.25) 2.66 (67.5) -0.31 (-7.75) -10.3%
    Revolutions per mile (km)
    809.15 (502.78) 796.69 (495.04) -12.46 (-7.74) -1.5%

     
    #299 Justdidit, Apr 24, 2015
    Last edited: Apr 24, 2015
  20. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Well shut my mouth... 215/30R20... even if its not available 'there' - you could probably find it else where...

    New Tires 215 30ZR20 82W NS 20 Noble Sport Nankang 215 30 20 2153020 | eBay

    Brand New 215 30R20 Achilles ATR Sport 20" Tire 2153020 215 30 20 | eBay

    30s ?? that is REALLY like rollin on rubber bands.... I thought my 35s were bad enough. lol