1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Will the new 2012 front bumper fit on a 2011?

Discussion in 'Gen 3 Prius Accessories and Modifications' started by D Unit, Apr 19, 2012.

Page 9 of 12
  1. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,919
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Look down a little further... ;)

    The last 2 pics are for the 2012+

    SCH-I535
     
    #161 xliderider, Dec 19, 2013
  2. D Unit

    D Unit Junior Member

    Joined:
    Oct 14, 2011
    80
    13
    0
    Location:
    Bay Area, CA
    Vehicle:
    2011 Prius
    Model:
    N/A
    Are these the ones you are referring to? I believe these are for the Prius V and not the regular Prius.
    [​IMG]
    [​IMG]
    Here's another picture of them on a Prius V.
    [​IMG]

    The ones I posted look like they are made for the classic Prius. I am a bit surprised I haven't seen anyone post them on a 2012 bumper yet. Since I have a 2010 bumper, I am considering pulling the trigger on these since they're cheaper than the US spec'd OEM ones.
    [​IMG]

    2012 Prius (classic)
    [​IMG]
     
    #162 D Unit, Dec 19, 2013
  3. still in school

    still in school Junior Member

    Joined:
    Dec 7, 2013
    28
    5
    0
    Vehicle:
    2010 Prius
    Model:
    Three


    Nice find! Makes me want to do the conversion!
     
    #163 still in school, Dec 19, 2013
  4. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,037
    1,110
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    Can supply a new pair of these Revier LED combination turn/DRLs and/or 4300K LED tow hook DRLs...

    See listing in For Sale section...
     
    #164 Air_Boss, Dec 19, 2013
  5. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,037
    1,110
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    #165 Air_Boss, Dec 29, 2013
  6. D Unit

    D Unit Junior Member

    Joined:
    Oct 14, 2011
    80
    13
    0
    Location:
    Bay Area, CA
    Vehicle:
    2011 Prius
    Model:
    N/A
    Will this Ebay DRL harness/relay work? If so, will they work for the LED turn signals and LED fogs?

     
    #166 D Unit, Jan 13, 2014
  7. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Yes they will work for the DRLs but I'm not sure what u mean by the signals & dogs.

    VS980 4G ?
     
    #167 sfv41901, Jan 13, 2014
  8. D Unit

    D Unit Junior Member

    Joined:
    Oct 14, 2011
    80
    13
    0
    Location:
    Bay Area, CA
    Vehicle:
    2011 Prius
    Model:
    N/A
    I ordered these LED signals and LED fogs. I'm assuming since they are both LEDs, that I might as well wire them using the DRL harness. I'll probably wire them to be on all the time.

    [​IMG]

    [​IMG]
     
    #168 D Unit, Jan 13, 2014
  9. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,919
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    D Unit, let me know how the LED foglights are. I'm considering getting a set of them, but I want to know how bright they are.

    I'm also interested in the amber ones too, but the pics they have make them look a little too orange.

    Any installs of 18w LED foglights? | PriusChat

    SCH-I535
     
    #169 xliderider, Jan 13, 2014
  10. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Assuming that the DRL harness was designed for halogen DRLs, u would be fine using it to power the DRLs & LED fogs.

    VS980 4G ?
     
    #170 sfv41901, Jan 13, 2014
  11. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,919
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    The description says they are for LED DRLs. If you want to control both sets, you might want to use 2 sets of the relays you linked.

    Unless you can confirm that the 2 sets of lights you want to put on is below the rated capacity of the relay in the harness.

    SCH-I535
     
    #171 xliderider, Jan 13, 2014
  12. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Since the description states LEDs then 1 would suggest using them for only 1 set unless like xliderider said u know what it's rated at.

    VS980 4G ?
     
    #172 sfv41901, Jan 14, 2014
  13. D Unit

    D Unit Junior Member

    Joined:
    Oct 14, 2011
    80
    13
    0
    Location:
    Bay Area, CA
    Vehicle:
    2011 Prius
    Model:
    N/A
    Can someone help me figure out the wiring to these DRLs? I can get the "light bar" to work, but not the LEDs. I am basically tapping the red and black wires straight into the battery for testing. Shouldn't the LEDs light up too?

    [​IMG]
     
    #173 D Unit, Jan 25, 2014
  14. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,919
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    No, the LEDs are the turn signals. They are powered by the wires in the standard connector, which should be plug and play with your turn signal wiring harness connector.

    SCH-I535
     
    #174 xliderider, Jan 25, 2014
  15. D Unit

    D Unit Junior Member

    Joined:
    Oct 14, 2011
    80
    13
    0
    Location:
    Bay Area, CA
    Vehicle:
    2011 Prius
    Model:
    N/A
    Oh, i see. But shouldn't they at least light up if I give them power?
     
    #175 D Unit, Jan 25, 2014
  16. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,919
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Yes, but the polarity might be wrong. Try reversing the power leads to the test wires. LEDs are polarity specific.

    SCH-I535
     
    #176 xliderider, Jan 25, 2014
  17. D Unit

    D Unit Junior Member

    Joined:
    Oct 14, 2011
    80
    13
    0
    Location:
    Bay Area, CA
    Vehicle:
    2011 Prius
    Model:
    N/A
    Reversing the polarity did the trick. :)

    When you say plug and play, I'm assuming you mean the existing 2010 turn signal harness that's already in my car, right? Do I need to re-splice my wires for the LEDs or are they supposed to be reversed?
     
    #177 D Unit, Jan 25, 2014
  18. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,919
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Try it out first. Then reverse the wires if they don't work. Oftentimes, you can release the terminals out of the connector using a small screwdriver to release a locking tab, then slip it out, reverse the wire positions, then reinsert the terminals till they lock into the connector.

    SCH-I535
     
    #178 xliderider, Jan 25, 2014
  19. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Only the signals will be pnp. The light bar (DRL) will need to be wired in.

    VS980 4G ?
     
    #179 sfv41901, Jan 25, 2014
  20. D Unit

    D Unit Junior Member

    Joined:
    Oct 14, 2011
    80
    13
    0
    Location:
    Bay Area, CA
    Vehicle:
    2011 Prius
    Model:
    N/A
    I am going to try to install the bumper today. To simplify things, I decided to go with a switchless setup and want everything to turn on when I turn on my low beams.

    Here's the relay harness I bought. Since the turn signals are PNP, I assume I can just tap the DRLs into the power/ground wire of my fogs, right? Secondly, what wire colors are the low beam and where should I tap into it?

    [​IMG]

    BTW, here's a pic of the new LED amber fogs and Revier DRLs I got from Panson.

    [​IMG]

    [​IMG]
     
    #180 D Unit, Feb 1, 2014
    Umar Ali likes this.
(You must log in or sign up to post here.)
Page 9 of 12