1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Help with HV battery Install

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by lengele103, Jun 17, 2012.

  1. lengele103

    lengele103 Junior Member

    Joined:
    Feb 11, 2010
    8
    0
    0
    Location:
    Eugene, Oregon
    Vehicle:
    2006 Prius
    Model:
    N/A
    Had a couple bad cell in my 2006 Prius, with 151000 miles. Bought a re-con battery pack and installed it. Now the car wont start, it would reonize the key. It only powers up in the stanby mode when the key is inserted into the dash.

    Do I have to do some kind of system reset to get the car the repond?
     
    #1 lengele103, Jun 17, 2012
  2. nh7o

    nh7o Off grid since 1980

    Joined:
    Dec 10, 2011
    1,686
    340
    0
    Location:
    Hawaii
    Vehicle:
    2009 Prius
    Model:
    II
    There are a number of posts here about pushing the battery connector up to get it completely and finally locked into position. That last click is critical.
     
    #2 nh7o, Jun 17, 2012
  3. KK6PD

    KK6PD _ . _ . / _ _ . _

    Joined:
    Mar 24, 2008
    4,003
    946
    118
    Location:
    Los Angeles Foothills
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Yeah, I have to admit the not seating the connector got me too, but I would lay odds that's your problem!
     
    #3 KK6PD, Jun 17, 2012
  4. Flying White Dutchman

    Flying White Dutchman Senior Member

    Joined:
    Dec 29, 2007
    4,374
    313
    0
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    the hv fuse handle!! push it down good!
     
    #4 Flying White Dutchman, Jun 18, 2012
  5. jdh2550

    jdh2550 Co-Founder, Current Motor Company

    Joined:
    Nov 16, 2010
    317
    249
    0
    Location:
    Ann Arbor
    Vehicle:
    2005 Prius
    Model:
    N/A
    Yep - I had the same experience with that fancy fuse holder safety interconnect thing-a-majig.

    However, after that I also got error code AA4 which was "Negative Contactor Stuck". I took it out and put it on a 12 V battery on the bench and it clunked open and shut a couple of times. I put it back in and all went well...

    When you got a refurbed pack was it a complete package including all the battery Computer and SMR gubbins?

    What did you do with your old pack?
     
    #5 jdh2550, Jun 18, 2012
  6. lengele103

    lengele103 Junior Member

    Joined:
    Feb 11, 2010
    8
    0
    0
    Location:
    Eugene, Oregon
    Vehicle:
    2006 Prius
    Model:
    N/A
    Okay, will try restting the plug handle, and I have my old battery pack. Trying to figure out if I will rebuild it and then sell it. Or maybe, add it back as an additional battery pack? I am sure someone has done this already? My son wants to modify the battery pack and then add it to his electric golf cart - ha, ha.
     
    #6 lengele103, Jun 19, 2012
  7. lengele103

    lengele103 Junior Member

    Joined:
    Feb 11, 2010
    8
    0
    0
    Location:
    Eugene, Oregon
    Vehicle:
    2006 Prius
    Model:
    N/A
    Cleaning out the garage and found the old battery pack. Any interested in it? As long as my latest issue is not a battery problem, I need to get rid of it.
     
    #7 lengele103, Jan 25, 2014
  8. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II

    I would be interested in playing with this old battery pack. However not sure how I can get it from Oregon
     
    #8 JC91006, Jan 25, 2014
  9. lengele103

    lengele103 Junior Member

    Joined:
    Feb 11, 2010
    8
    0
    0
    Location:
    Eugene, Oregon
    Vehicle:
    2006 Prius
    Model:
    N/A
    You will just have to drive up sometime.....
     
    #9 lengele103, Jan 25, 2014
(You must log in or sign up to post here.)