1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Added a Pioneer AVH-X5500BHS

Discussion in 'Gen 2 Prius Audio and Electronics' started by jakthebomb, Dec 31, 2013.

  1. jakthebomb

    jakthebomb Junior Member

    Joined:
    Dec 20, 2013
    16
    4
    0
    Location:
    Las Vegas
    Vehicle:
    2006 Prius
    After buying a Prius 06 that had the JBL system in it, I was missing all of the features of my Pioneer AVH-X5500BHS. The AUX port in the car has nothing on the Bluetooth Audio feature.

    After 15 Minutes to remove all of the panels, Waiting the whole day for UPS to deliver the wiring harness and installing the radio in the dark and 22F weather. I am left with a fully working Radio and retained my climate controls.

    For those who want to know, YES the climate controls on the steering wheel still works after replacing the factory radio. Just the back lights for the buttons are no longer lit. You just have to make sure the 68ohm resistor is attached to the Pink and White wires on the 20 Pin connector.

    Only issue I am left with is the dreaded Red Triangle. I have read that it will resolve it'self automatically. Mine hasn't yet since I only used the Radio for a few minutes. I will report tomorrow if it is working.

    It is a bit odd having two touchscreens in my car but I am sure I will get used to it.

    On the plus side the sound quality is by far vastly improved. The stock Radio didn't do the JBLs justice. The Pioneer has a 10 band EQ as opposed to the horrible 3 band that the Prius came with. I also now have HD Radio which the car desperately needed.

    Here is a photo of the setup. Pioneer Prius 06.png Any Questions please ask away.
     
    #1 jakthebomb, Dec 31, 2013
  2. jakthebomb

    jakthebomb Junior Member

    Joined:
    Dec 20, 2013
    16
    4
    0
    Location:
    Las Vegas
    Vehicle:
    2006 Prius
    All is well. Red Triangle is gone!

    here is a better shot of the setup. IMG_0306.JPG
     
    #2 jakthebomb, Dec 31, 2013
    FreydNot likes this.
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,138
    50,052
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    wow, that came out perfect, all the best!(y)
     
    #3 bisco, Dec 31, 2013
  4. ronjuan

    ronjuan Junior Member

    Joined:
    Dec 2, 2008
    59
    8
    0
    Location:
    Encino, Ca.
    Vehicle:
    2009 Prius
    Wow looks great!!! A couple of questions....did you have the premium JBL system before? Did you leave the original speakers or replace them? How much was the Pioneer unit? How long did it take to do the install? I have the JBL premium sound....what or where did you get the side pieces to get it to fit so well? Thanks Ron
     
    #4 ronjuan, Jan 7, 2014
  5. gatorglenn

    gatorglenn Member

    Joined:
    Jun 17, 2010
    138
    45
    0
    Location:
    Atlanta
    Vehicle:
    2007 Prius
    That looks great. Want to do my 07?

    Glenn
     
    #5 gatorglenn, Jan 16, 2014
  6. gatorglenn

    gatorglenn Member

    Joined:
    Jun 17, 2010
    138
    45
    0
    Location:
    Atlanta
    Vehicle:
    2007 Prius
    I want to install a Pioneer AVH-X3500BHS. Similar unit, I guess a couple of models lower.

    Glenn
     
    #6 gatorglenn, Jan 16, 2014
  7. ishootstuff

    ishootstuff Junior Member

    Joined:
    Jan 16, 2014
    39
    18
    0
    Location:
    Palm Coast Florida
    Vehicle:
    Other Hybrid
    Model:
    SE
    This is my first post as I have only owned my Prius for two days now :)

    I assume you used the Metra 95-8240B kit to install the double din Pioneer unit.
    I am wondering if you also used the TYTO-01 kit to turn on the JBL amp, or if it isn't required. I have a Pioneer double din I want to put in the Prius and I'll probably add a sub later, so maybe I'll need another amp too, but for now I just want a new head unit with the stock speakers like you have there.
     
    #7 ishootstuff, Jan 17, 2014
  8. jakthebomb

    jakthebomb Junior Member

    Joined:
    Dec 20, 2013
    16
    4
    0
    Location:
    Las Vegas
    Vehicle:
    2006 Prius

    You need the TYTO-01 kit for the JBL system to work. I used the Metra kit and it worked perfectly. The Metra kit comes with the Resistor that you need to use to maintain the Climate Controls. Sound Quality out of the JBLs with the pioneer sound far better. Still not as good as my old Blaupunckt 665s Tri-Component speakers. Only thing I didn't install was the Steering Controller. But as stated all of the other buttons still work.
     
    #8 jakthebomb, Jan 20, 2014
  9. jakthebomb

    jakthebomb Junior Member

    Joined:
    Dec 20, 2013
    16
    4
    0
    Location:
    Las Vegas
    Vehicle:
    2006 Prius

    Mine has the JBL System. The Pioneer unit is about $350 on amazon. I bought it a year ago and moved it from my Acura TL. I love the radio and hated being without it. Go to crutchfield, they have everything you will need.
     
    #9 jakthebomb, Jan 20, 2014
  10. ishootstuff

    ishootstuff Junior Member

    Joined:
    Jan 16, 2014
    39
    18
    0
    Location:
    Palm Coast Florida
    Vehicle:
    Other Hybrid
    Model:
    SE
    I installed my Pioneer DVD with PAC TATO and I hate it. First off, it randomly lowers the volume for just a second then it recovers, but now the rear output has completely quit. I probably got a bad unit. I called PAC and I got voice mail. Left a message last week and no return call.
    My dash kit did not come with a resistor, but I had several laying around so I was able to retain climate control, but no steering wheel control lights. I may end up just removing the factory amp and do all the wiring like I did in my Lexus because I want to add a little Sub too.
     
    #10 ishootstuff, Jan 22, 2014
  11. ishootstuff

    ishootstuff Junior Member

    Joined:
    Jan 16, 2014
    39
    18
    0
    Location:
    Palm Coast Florida
    Vehicle:
    Other Hybrid
    Model:
    SE
    Little update... I swapped out my TATO unit with another and POOF! Sounds great now. I just got a bunk device.
     
    #11 ishootstuff, Jan 23, 2014
  12. Patrick Carter

    Patrick Carter New Member

    Joined:
    Jan 30, 2014
    12
    1
    0
    Location:
    Newland, North Carolina
    Vehicle:
    2006 Prius
    Model:
    II
    Sharp looking install. So did the backlights for the climate controls never come back on?
     
    #12 Patrick Carter, Jan 30, 2014
  13. jakthebomb

    jakthebomb Junior Member

    Joined:
    Dec 20, 2013
    16
    4
    0
    Location:
    Las Vegas
    Vehicle:
    2006 Prius
    Nope, however it isn't really a big deal to me. As long as the buttons work I am happy.
     
    #13 jakthebomb, Feb 4, 2014
  14. Austin lavicka

    Austin lavicka Junior Member

    Joined:
    Feb 5, 2014
    7
    0
    0
    Vehicle:
    2007 Prius
    Model:
    II
    A few questions! Does the aux port still work? Will this unit work in a car without jbl? And where did you get the plastic molding around the reciever? Thanks guys!
     
    #14 Austin lavicka, May 2, 2014
  15. hannah

    hannah Member

    Joined:
    Jul 19, 2004
    101
    6
    0
    Location:
    Auckland, New Zealand
    Vehicle:
    2009 Prius
    Model:
    N/A
    Hi jakthebomb

    Can you please list the parts that you need to do this install? And possibly the link where you got the items from please.

    Best regards
    Hannah
     
    #15 hannah, Jul 16, 2014
  16. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    call crutchfield. they have what you need.
     
    #16 69shovlhed, Jul 16, 2014
  17. Darren Magana

    Darren Magana New Member

    Joined:
    Aug 23, 2013
    3
    0
    0
    Vehicle:
    2005 Prius
    Model:
    N/A
    I just got a pioneer avhx2500bt for my base model. Do i need to install a Resistor as well? if so where does it go?
     
    #17 Darren Magana, Jul 29, 2014
  18. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    yes you need the resistor. however, if you buy the correct harness kit, the resistor is already installed, if you can solder, its very easy to retrofit your pioneer. and get a metra axxess unit for your steering wheel buttons to work.
     
    #18 69shovlhed, Aug 2, 2014
(You must log in or sign up to post here.)