What did you do to ur Gen III Prius today????

Picture and dyno results, please.

 

Just order up the Lexus door lock striker, part # 69410-33020, and those covers just snap right on.



It's the one on the left....

 

I ordered these, staying on just fine.

YUNC for Toyota Yaris Highlander Vios(2010 2013) Corolla Prado Prius RAV4 car door lock protection cover parts Free shipping-in Stickers from Automobiles & Motorcycles on Aliexpress.com

 

I got to get body shop estimates for the bonehead that backed into me a few days ago

 

Thanks!
Just ordered a set...

 

They're available on eBay as well:

Striker covers, this is what's listed as compatible on the listing description:

Compatible:

Toyota Highlander 2008+

Toyota FJ Cruiser 2010+

Toyota Sequoia 2008+

Toyota Yaris 2005+

Toyota Alphard 2008+

Toyota Previa 2012+

However, they should fit the Prius.

 

The ones I linked, fit the Prius and the Rav4. The Ebay ones say, not compatible for 2010 Prius.

 

They both also say they're compatible with the Highlander, so go figure.

SCH-I535

 

Installed a set of Michelin X-Ice 3 snow tires. I was amazed at how quite they are and how smooth the ride is. They are however not as stable as my the Primacy MXM4's I ride on the rest of the year. But that's probably because of the size 195/65/15 vs 215/45/17.

 

Made my DRL's yellow..





SCH-I545 ?

 

Just ordered a set of these ...

MOMO Next 17x7
• Matte Black
• +35mm offset (will put a +5mm spacer on rear to make it 35/40, front/rear)
• Black lug nuts instead of polished
• 22lbs. each

 

The +5 spacer will actually give you a +30 offset, which will make it stick out further. You will need to drill out the lug holes to get the +40 offset you want. I don't know how much that costs per wheel to do that. Nice looking wheel though.


PlusIV

 

Installed a set of Michelin X-Ice 3 snow tires on new alloy rims
42 front /40 rear , smooth riding , re-installed my grill blocking from last year
Will post photos after it stops snowing .......
,,,,,,,,,,,HAPPY THANKSGIVING

 

Oh, then maybe I'll leave as is. I don't want it to stick out too far, but possibly have it closely flushed with the fender. Thanks.

 

I ordered this. I can't wait for it to come in. I am now working on my decision of whether to install a flasher for the brake light. I don't want it to always flash though. Not sure what to buy though if I were to decide to add one.

 

Don't do it. It's flashy enough without the flasher.

 

Cleaned my steering wheel today (47,000) with Lexol Leather Cleaner. I used various wipes and cleaners and the Lexol really cleaned the grime out of the grain of leather. Used mothers leather conditioner because it was handy. Turtle wax bug and tar remover did an excellent job taking the tar off the lower rocker panels of my pearl paint.

 

I removed the OEM lower mouldings because they don't match the black chrome bits I have on the car.... and was able to find other lower mouldings (non-OEM) in black chrome...

 

Put some clazzio seat covers

Picked up the covers in Torrance CA.


Before


Before


Got the first seat in, what a pain in the @$$.


Front done


Removed rear seat


Almost done


Rear done


Finally. Took me 2 days because my hands were suffering.

Galaxy Note 2 ? 4

 

New 2 inch hitch

Didn't have time to wash it.


Turn off signatures in Tapatalk Tapatalk