balancing beads

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by edwardob, Jul 3, 2013.

Page 3 of 4
  1. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    webpage does'nt mention dyna anywhere???!!!!!
    quote from webpage
    "Welcome to balancing beads. The weights are actually perfectly round beads that give you a custom balance every time you pull away from the curb. There are a couple ways you can balance your car's tires with beads. The commercial way is to buy balancing beads in a kit. Of course this is "Tools-On-The-Cheap" so I have a cheaper alternative: high density air-soft BBs!! The reason I use these BBs is simple; they're perfectly round, will not corrode (and go out of round which cause them not to be able to roll) and of course, they're cheap. If you buy one of these bottles of beads, you can balance 2 sets of tires (8 tires) for under $15. "

    not sure what your problem....it clearly states ... high density air-soft BBs!!

    can't really do more for you....all i know is what i read on that webpage
    AircoledTech.com's "Tools-On-The-Cheap" Wheel balancing With
    Beads
     
    #41 edwardob, Oct 22, 2013
  2. gliderman

    gliderman Active Member

    Joined:
    Aug 2, 2011
    751
    224
    0
    Location:
    Texas
    Vehicle:
    2010 Prius
    Model:
    IV
    Google is your friend. If you cant Google, try Yahoo, Bing, or do a search on search engines and pick from the hundreds listed.
     
    #42 gliderman, Oct 22, 2013
  3. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    Gliderman

    I got it, I talked to Nath and he said I can buy bb beads from Walmart it cheaper and try out, he had been using that for last 3-5 years with all good result and no balance what so ever :), I will try it:)

    V/r

    Khoi nguyen
     
    #43 kknguyen1168, Oct 22, 2013
  4. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    welcome to the club
     
    #44 edwardob, Oct 23, 2013
  5. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    edward

    I am going to install beads this weekend, however when I read your post, you put 120 grams=4.232 ounces is it too much? does it suppose to be 3.5 ounce is the max? please let me know or should I put in 4.232 like you.

    V/r

    Khoi Nguyen
     
    #45 kknguyen1168, Nov 11, 2013
  6. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    mmmm ..whatever he recommended should be fine.....i was over enthusiastic...but no problems
     
    #46 edwardob, Nov 11, 2013
  7. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    edwardob

    good to hear, how you car run so far with beads, any update? any problem?

    V/r

    Khoi nguyen
     
    #47 kknguyen1168, Nov 11, 2013
  8. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    UPDATE:)

    Just install 3.5 ounces BEADS each for both front tires, oh boy!!!!!!!!!!!:) so beautiful, hit highway 80 MPH and absolutely no VIBRATION AT ALL, I am so impress and love it, will try to do the back tires tomorrow:), damn feel so GOOOOOOOOOOOOOOOOOOOOOOOOOOOOOD :)

    V/r

    Khoi nguyen
     
    #48 kknguyen1168, Nov 12, 2013
  9. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    welcome to the club......
    just remember not use liguid or canister punture repair that pump into valve .......they will clog your beads
     
    #49 edwardob, Nov 13, 2013
  10. Den49

    Den49 Member

    Joined:
    Oct 25, 2010
    498
    269
    0
    Location:
    Maryland
    Vehicle:
    2010 Prius
    Model:
    IV
    I used a set of balancing rings that were filled with beads back in the 70's on a 1976 Nova. They worked. The reason I stopped using them and I think why they are not used today is that they cannot compensate beyond a small amount of imbalance and dynamic wheel/tire balancers are much better today than years ago when wheels and tires were "static balanced". In other words, most tires/wheels still need to be balanced with lead weights because more weight is needed than contained in the beads and once a good quality tire/wheel is properly balanced it will usually stay balanced. The beads will compensate for minor imbalance. Below is a picture of a balance ring that is partially filled with beads.
    balance ring.jpg
     
    #50 Den49, Nov 13, 2013
  11. MikeDee

    MikeDee Senior Member

    Joined:
    May 9, 2013
    1,567
    596
    0
    Location:
    San Francisco Bay Area
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Plus
    Dynamic balancing also balances in two planes instead of one like the rings and static balancing do.
     
    #51 MikeDee, Nov 13, 2013
  12. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    this is not ring!..no comparrision
    this is beads which move around all the tyre as needed...
    and those who use them swear by them.......come back to the tread when you've tried them!
     
    #52 edwardob, Nov 13, 2013
  13. Den49

    Den49 Member

    Joined:
    Oct 25, 2010
    498
    269
    0
    Location:
    Maryland
    Vehicle:
    2010 Prius
    Model:
    IV
    Same principle. Same result.
     
    #53 Den49, Nov 13, 2013
  14. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    not same....
    beads are floating inside tyre/wheel going to where the are needed....

    anyway the proof is in the eating....and they work....GREAT!!!
    SEE ALSO kknguyen1168 above...

    enjoy your lead weights amigo
     
    #54 edwardob, Nov 13, 2013
  15. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    hi guys

    same or not the same!!! what the point???? the main point it work and people like me want to try the old or new thing, it is knowledge, and the most important is saving the MONEY:), I am a sucker for WISDOM:), I want and always want to learn new things or old things:). I am not trying to convince anyone to do it or try to do what I am doing, that is up to each person, but fact is fact, and it is working and I like it:)


    V/r

    Khoi nguyen
     
    #55 kknguyen1168, Nov 13, 2013
    edwardob likes this.
  16. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    No problem...using 3 months.....changed to winter tyres...recently....also with beads...no issue........any speed....up to 5km per hour there's a "beads in a bottle sound "....... after that silence...
    there grea
    biggest critic are always those who have'nt tried something or tested it out..
    the earth was flat.......sun went around the earth...iphone wont sell....

    we're just here to help.....beads...water.....lead weights....slime.....
    TRY whatever you like
    this tread is to help those who want to try beads.....
    for us who TRIED beads. they are GREEEEEEAAAAAATTTTTTT!

    maybe we have reinvented the wheel..........
    oops...remember galileo was under house arrest for saying the earth was a sphere
     
    #56 edwardob, Nov 14, 2013
  17. Slick26

    Slick26 Junior Member

    Joined:
    Nov 15, 2013
    40
    13
    0
    Location:
    Twin Cities, MN
    Vehicle:
    2010 Prius
    Model:
    III
    I use Ride-On for my motorcycle tires and l like it more because it will seal tire punctures as well. Beads won't.
     
    #57 Slick26, Nov 16, 2013
  18. kknguyen1168

    kknguyen1168 Member

    Joined:
    Jan 15, 2011
    453
    35
    0
    Location:
    san diego
    Vehicle:
    2010 Prius
    Model:
    III
    Slick26

    Good to hear that you like it:), If you like it then I love it:)

    V/r
     
    #58 kknguyen1168, Nov 16, 2013
  19. edwardob

    edwardob Member

    Joined:
    Sep 26, 2009
    227
    33
    0
    Location:
    ireland
    Vehicle:
    2010 Prius
    Model:
    III
    enjoy your slime
    the balancing bead guru of all wisdom wrote once

    " Ever removed a Slimed tire??. . . Yuck!!"

    but hee !enjoy your slime...choices are available! this is a !"pay for weights free zone "

    i used slime once or twice in the past myself and its good.....but bbs are cheaper

    only putting weights on will upset this tread

    any other ideas out there?
     
    #59 edwardob, Nov 17, 2013
  20. Slick26

    Slick26 Junior Member

    Joined:
    Nov 15, 2013
    40
    13
    0
    Location:
    Twin Cities, MN
    Vehicle:
    2010 Prius
    Model:
    III
    Only speaking about my motorcycle tires, it hasn't been a problem removing them and putting new ones on. The Ride-On system is water soluble, so even if you do make a mess, which I haven't experienced yet, it's relatively easy to clean up.

    I don't know about car tires, as I haven't used Ride-On for mine yet.

    Also, I know a lot of truck drivers who use Ride-On in their truck tires, as a balancer and as a plug for punctures, and most swear by it.
     
    #60 Slick26, Nov 17, 2013
(You must log in or sign up to post here.)
Page 3 of 4