1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Window frame paint chip

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by -y0-, Sep 11, 2013.

  1. -y0-

    -y0- Member

    Joined:
    Jul 25, 2013
    142
    20
    0
    Location:
    Pacific NW
    Vehicle:
    2013 Prius c
    Model:
    Four
    Does anyone have suggestions for fixing a chip on the front driver window frame that divides the quarter window from the main? It's like a matte black paint I think. I could get a new frame for around $60 but rather save money and fix it myself.[​IMG]
     
    #1 -y0-, Sep 11, 2013
  2. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,150
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    Plastidip. $7 a can and it comes off if you mess up.
     
    #2 ztanos, Sep 11, 2013
  3. -y0-

    -y0- Member

    Joined:
    Jul 25, 2013
    142
    20
    0
    Location:
    Pacific NW
    Vehicle:
    2013 Prius c
    Model:
    Four
    Good idea. Should I do all four to match?
     
    #3 -y0-, Sep 11, 2013
  4. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,150
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    Wouldn't hurt, give that extra layer of protection. It is cheap and will probably only use 1 can.
     
    #4 ztanos, Sep 11, 2013
  5. -y0-

    -y0- Member

    Joined:
    Jul 25, 2013
    142
    20
    0
    Location:
    Pacific NW
    Vehicle:
    2013 Prius c
    Model:
    Four
    I tested out the Plasti Dip yesterday. The rubber seals make it difficult to get it right.
     
    #5 -y0-, Sep 12, 2013
  6. ztanos

    ztanos All-around Geek!

    Joined:
    Jan 10, 2013
    3,339
    1,150
    40
    Location:
    Cumming, Georgia
    Vehicle:
    2012 Prius c
    Model:
    Four
    Ah, might try painters tape. Paint and remove the tape before it has a chance to dry for even edges.
     
    #6 ztanos, Sep 12, 2013
  7. -y0-

    -y0- Member

    Joined:
    Jul 25, 2013
    142
    20
    0
    Location:
    Pacific NW
    Vehicle:
    2013 Prius c
    Model:
    Four
    I did that but can't decide if I want to do the rubber seals with the actual frame or try to keep it separate. I guess trying it again is better than getting a new frame because of a tiny chip.
     
    #7 -y0-, Sep 12, 2013
    ztanos likes this.
  8. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,919
    3,142
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    How about overlaying with a matte black vinyl? Also removable if you don't like it, or want to change.

    SCH-I535
     
    #8 xliderider, Sep 12, 2013
(You must log in or sign up to post here.)