1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Hi I need to remove the plastic cover of the exterior rearview mirrors of my 2006 Prius

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Kako, Jul 30, 2013.

  1. Kako

    Kako Junior Member

    Joined:
    Jul 30, 2013
    1
    0
    0
    Vehicle:
    2006 Prius
    Model:
    II
    Does anyone knows how to do this properly without breaking it ? Let me know. Thanks
     
  2. jadziasman

    jadziasman Prius owner emeritus

    Joined:
    Jan 17, 2011
    1,355
    487
    0
    Location:
    District 6
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    You need to remove the mirror first, then you can remove the cover.

    You will need a moulding remover to detach the four claws that hold the mirror onto the housing.

    Disconnect the two electrical connectors and remove the mirror from the housing.

    Once you get the mirror removed, detach the six claws which hold the cover on the housing.

    Done.
     
  3. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    ^^No - waaaaay too much work.

    If your only looking to remove the 'cover' that hides the mirror motor and housing - I used a very small flathead screwdriver and just popped the cover off. Done it multiple times, never broke any tabs.

    Did it when I did my puddle lights and PlastiDip'd the side mirror covers
    [​IMG]

    [​IMG]
     
  4. jadziasman

    jadziasman Prius owner emeritus

    Joined:
    Jan 17, 2011
    1,355
    487
    0
    Location:
    District 6
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    It might help the OP out if you posted a photo of the opposite side of the covers (if you have it)
    so he can see where the tabs are.
     
  5. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Don't have any pictures myself of the back side but this is the image that helped me of a G3
    [​IMG]
     
  6. artrockets

    artrockets Member

    Joined:
    Aug 14, 2007
    39
    39
    0
    Location:
    California
    Vehicle:
    2007 Prius
    Model:
    N/A
    #6 artrockets, Oct 9, 2019
    Last edited: Oct 9, 2019
  7. artrockets

    artrockets Member

    Joined:
    Aug 14, 2007
    39
    39
    0
    Location:
    California
    Vehicle:
    2007 Prius
    Model:
    N/A
  8. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,906
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Without arguing whether it's possible to do without popping the glass out, I'll just say: I pop the glass out. It's easy, it's made to pop out, and the claws you push on to free the color cover are right there to push on after you do.
     
  9. artrockets

    artrockets Member

    Joined:
    Aug 14, 2007
    39
    39
    0
    Location:
    California
    Vehicle:
    2007 Prius
    Model:
    N/A
    My pics are all messed up.. you can get in above the mirror into the cowling(between mirror and cowling) with a thin flat blade and release the 2 clips that hold in the middle..

    2 clips in the middle and 3 hooks along the bottom..

    maybe adjust your mirror either full down or up and se if you can see back there with a flashlight.. Ill try and get my pics working..
     
  10. artrockets

    artrockets Member

    Joined:
    Aug 14, 2007
    39
    39
    0
    Location:
    California
    Vehicle:
    2007 Prius
    Model:
    N/A
    I put some bits of green tape on the 2 bits you have to hit to release the mirror...

    [​IMG]