1. Attachments are working again! Check out this thread for more details and to report any other bugs.

installing on win 7 ult.

Discussion in 'PriiDash (TM)' started by chronon, Mar 13, 2013.

Page 2 of 2
  1. chronon

    chronon Active Member

    Joined:
    Jun 14, 2007
    601
    106
    3
    Location:
    here and there aint be in frozen wasteland no mo..
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    i was just reminded of why i neever set up Xcodes in the scanguage 2 .. it not exactly a nice walk in the park ....
     
    #21 chronon, Mar 14, 2013
  2. 2009Prius

    2009Prius A Wimpy DIYer

    Joined:
    Mar 25, 2009
    2,705
    510
    63
    Location:
    USA
    Vehicle:
    2009 Prius
    What was the problem? I haven't done it for a long time but when I did it ~ 3 years ago I just followed the instruction carefully and it worked. If the only thing you need to know is the HV battery SOC then ScanGauge X-Gauge is probably the easiest way to go. I do remember reading that more recently people were having more troubles with the newer ScanGauge with newer firmware (4.0 and above?). When did you buy your ScanGauge?

    from my old notes for SOC X-Gauge:
    TXD RXF RXD MTH NAM
    07E321CE 056186CE0000 3008 000A00020000 SOC
     
    #22 2009Prius, Mar 14, 2013
    chronon likes this.
  3. chronon

    chronon Active Member

    Joined:
    Jun 14, 2007
    601
    106
    3
    Location:
    here and there aint be in frozen wasteland no mo..
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    i have the older 3.15 xguage so this may go through quickly ...
     
    #23 chronon, Mar 14, 2013
  4. chronon

    chronon Active Member

    Joined:
    Jun 14, 2007
    601
    106
    3
    Location:
    here and there aint be in frozen wasteland no mo..
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    does priidash work better on an XP system than Vista, win7 or win8 ? I'll be trying those codes today on the Xguage, thanks for posting your notes ... My bigger problem (than knowing the HV state of charge) is that I can't manually turn the crank more than about 1/4 turn without binding -- not sure how the parking break, Park and Nuetral revolve around the manual turning of the crank but a few havesaid that it should turn over, even almost as easy as doing so by hand ...
     
    #24 chronon, Mar 14, 2013
  5. 2009Prius

    2009Prius A Wimpy DIYer

    Joined:
    Mar 25, 2009
    2,705
    510
    63
    Location:
    USA
    Vehicle:
    2009 Prius
    I have run PriiDash on XP and Win 7 - both work fine. Have you tried using a terminal program to talk to the ELM? I use "STN term" which can be downloaded from
    ScanTool.net, LLC - Downloads

    Sounds like you are dealing with a serious mechanical problem - down the road when you make progress in fixing it PriiDash may be able to provide more info than ScanGague to help with diagnosis.
     
    #25 2009Prius, Mar 14, 2013
  6. chronon

    chronon Active Member

    Joined:
    Jun 14, 2007
    601
    106
    3
    Location:
    here and there aint be in frozen wasteland no mo..
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    --- I'm certain it will - the 25+ guages dazzle the eye on running that simulation .. the desire to have the car running with the priiDash monitoring was very great ... I will try communicatinng with the elm and the term program .. I'll get the xguage going 1st ... and then can get see about my elm talking -- i had wanted to use an elm program to see for myself if it was even still working since the last to use it was my brother and he claimed 'it worked' -- but that was several years ago ....
     
    #26 chronon, Mar 14, 2013
  7. chronon

    chronon Active Member

    Joined:
    Jun 14, 2007
    601
    106
    3
    Location:
    here and there aint be in frozen wasteland no mo..
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    I hooked up STN term and ran the buttons and got the following :
    (a couple things returned an error - but its just plugged into this pc on the USB, no connection to OBDII)
    (running on com 3)

    OK
    ATZ
    ATZ

    OK
    ATI
    ATI

    LSI Softmodem Version 2.2.89.2

    OK
    AT@1
    AT@1

    ERROR
    ATSP 00
    ATSP 00

    ERROR
    ATDP
    ATDP
    0100

    NO CARRIER
    100
     
    #27 chronon, Mar 21, 2013
  8. 2009Prius

    2009Prius A Wimpy DIYer

    Joined:
    Mar 25, 2009
    2,705
    510
    63
    Location:
    USA
    Vehicle:
    2009 Prius
    #28 2009Prius, Mar 21, 2013
  9. chronon

    chronon Active Member

    Joined:
    Jun 14, 2007
    601
    106
    3
    Location:
    here and there aint be in frozen wasteland no mo..
    Vehicle:
    2005 Prius
    Model:
    ----USA----
     
    #29 chronon, Mar 21, 2013
  10. chronon

    chronon Active Member

    Joined:
    Jun 14, 2007
    601
    106
    3
    Location:
    here and there aint be in frozen wasteland no mo..
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    Finally got it put in (not a timid thing to find and enter .. had to go through that mem 0 multiple times to finally
    get it right ) --- and my SOC come as a read out of 26.5 ... pretty close to the bottom ..;( no easy way to charge the HV
    for starting a new ICE ...
     
    #30 chronon, Mar 21, 2013
(You must log in or sign up to post here.)
Page 2 of 2