1. Attachments are working again! Check out this thread for more details and to report any other bugs.

What did you do to ur Gen III Prius today????

Discussion in 'Gen 3 Prius Accessories and Modifications' started by sfv41901, Jul 23, 2012.

  1. bino

    bino JDM ZVW30

    Joined:
    Mar 21, 2008
    1,348
    706
    0
    Location:
    SoCal 91739
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    needs at least min of 10 participants to have our own class......

    go on and reg.... I joined just for fun and the camaraderie with other fellow toyota owners...
     
    Bullet Salvador, sfv41901 and Burna J like this.
  2. Airrider

    Airrider Junior Member

    Joined:
    Mar 5, 2013
    9
    3
    0
    Location:
    Walnut Creek, CA
    Vehicle:
    2010 Prius
    Model:
    II
    I bought my first prius two days ago. I work in the East Bay outside of San Fransico selling cheap electricity through solar panels. I flew to New Orleans where the car was at and I'm taking a road trip with the wife and driving it back. It's the Winter Gray 2010 model II. Well I had a billion Mods that I wanted to do to it, but pictures of the car didn't show all the tiny nasty scratches it had. So I think I may sale it in one or two years and get one in better condition. Number one mod I'd like to do though is CT200h Seats. :) car has 94,000 Miles was 12,600. Even though it has a lot of small scratches I think I got a solid deal. I also own a 66' toyota landcruiser. I'm super excited to have another toyota.
     
  3. xPETEx

    xPETEx Junior Member

    Joined:
    Feb 7, 2013
    76
    21
    0
    Location:
    Victoria, BC, Canada
    Vehicle:
    2013 Prius v wagon
    Model:
    N/A
    I installed 1.5" high density foam into the the front seat bottoms and backs. so much more comfortable now. I installed heated seats kits while I was in there. took 4 hours. Foam was 14"x11" x 4 pieces which cost $20 and the heated seat kits cost $40 from ebay.
     
  4. FishCandy

    FishCandy Active Member

    Joined:
    Dec 27, 2012
    220
    292
    0
    Vehicle:
    2013 Prius
    Model:
    Two
    Just installed the 5 Axis body kit sides and back, with the Prius Plus front. Rims are being built from Japan. I wish they were here now!

    IMG_5265.JPG IMG_5266.JPG IMG_5267.JPG IMG_5269.JPG IMG_5270.JPG IMG_5271.JPG IMG_5272.JPG IMG_5274.JPG IMG_5275.JPG IMG_5276.JPG
     

    Attached Files:

  5. mrfritz0528

    mrfritz0528 Ironman, Ultra Marathoner, and Prius owner!

    Joined:
    Feb 25, 2012
    87
    92
    0
    Location:
    Irvine
    Vehicle:
    2010 Prius
    Model:
    Four
    image.jpg

    I'm here with the master at work (sfv41901). New mods on my Prius today. I will keep you guys posted! image.jpg
     
    sfv41901, wotcher and ucsmfu like this.
  6. mnml

    mnml Ain't nobody got time for that.

    Joined:
    Nov 4, 2012
    377
    161
    4
    Location:
    Ladera Ranch, CA
    Vehicle:
    Other Electric Vehicle
    Model:
    N/A
  7. Austin5

    Austin5 Go Bruins

    Joined:
    Mar 3, 2013
    34
    6
    0
    Location:
    Boston MA
    Vehicle:
    2010 Prius
    Model:
    N/A
    Are the seats too thick now? do you sit way higher? because I hate the seats hardness, but I also like to feel like I'm sitting on the ground because that's how my first two cars were. I hate the prius seat!
     
  8. xPETEx

    xPETEx Junior Member

    Joined:
    Feb 7, 2013
    76
    21
    0
    Location:
    Victoria, BC, Canada
    Vehicle:
    2013 Prius v wagon
    Model:
    N/A
    They're thicker. I'm 6'2 so the rear view mirror was always slightly in the way, and now it's slightly more in the way. I'm probably about 3/4 of an inch higher up. It's not a huge difference in height, but way way more comfortable. Especially my back is way better, the stock seats push my shoulders forward and cause really bad pain in my traps. My shoulders are free now. I'm heading on a 7000km trip in a week so I'll report back after that.
     
  9. Blu-ray

    Blu-ray Blizzard Brigade #215

    Joined:
    Dec 22, 2012
    471
    198
    0
    Location:
    TampaBay, FL
    Vehicle:
    Other Hybrid
    Model:
    N/A

    I rotated my mirror so it's upside down. It is now much less in the way. A tad odd going to the top of the mirror to switch for nighttime mode but u get used to it.
     
    xPETEx likes this.
  10. xPETEx

    xPETEx Junior Member

    Joined:
    Feb 7, 2013
    76
    21
    0
    Location:
    Victoria, BC, Canada
    Vehicle:
    2013 Prius v wagon
    Model:
    N/A
    I'll try that. thanks for the tip!
     
  11. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Sounds like a solo road trip :whistle:
     
    Blu-ray likes this.
  12. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Thx mrfritz.....I would share ur mods but thats ur joy so have at it.
     
    mrfritz0528 likes this.
  13. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    picked up the Tanabe coilovers today, placed orders for Seibon carbon fiber hood + Cusco front strut tower bar ><

    Busy day tomorrow. gonna re connect my hatch led's, re adjust the JDM steering wheel, finish installing clazzio leather seats, and apply some epoxy + hardener to my fuse box cover, to give it a wet carbon fiber look :p
     
    sfv41901 likes this.
  14. xPETEx

    xPETEx Junior Member

    Joined:
    Feb 7, 2013
    76
    21
    0
    Location:
    Victoria, BC, Canada
    Vehicle:
    2013 Prius v wagon
    Model:
    N/A
    that made a huge difference!! Thanks so much!
     
    Blu-ray likes this.
  15. Dawit

    Dawit Active Member

    Joined:
    Nov 10, 2012
    209
    137
    6
    Location:
    Phoenix, AZ
    Vehicle:
    2010 Prius
    Model:
    III
    photo.JPG bumper arrived from Japan in excellent condition with no damage a few days ago. I was worried about the color difference but happy to say that the color is an exact match :) View attachment 48281 Will be doing the install as soon as I get the grill and Drl controller.
     
    BCP and sfv41901 like this.
  16. Austin5

    Austin5 Go Bruins

    Joined:
    Mar 3, 2013
    34
    6
    0
    Location:
    Boston MA
    Vehicle:
    2010 Prius
    Model:
    N/A
    Nice
    Nice to know, I might have to get them. Same height at 6' 2".. But man I would hate to be even higher!!
     
  17. FishCandy

    FishCandy Active Member

    Joined:
    Dec 27, 2012
    220
    292
    0
    Vehicle:
    2013 Prius
    Model:
    Two
    No i had to color match it. They did an awesome job!
     
  18. mrfritz0528

    mrfritz0528 Ironman, Ultra Marathoner, and Prius owner!

    Joined:
    Feb 25, 2012
    87
    92
    0
    Location:
    Irvine
    Vehicle:
    2010 Prius
    Model:
    Four
    Another successful 2012 Toyota Prius front bumper install! Much thanks to sfv41901 for the clean, meticulous, and working installation.

    Here's a final shot of my 2010 front bumper
    IMG_3140.JPG
    Installation of the Lexus CT200h horns. No more dinky beep-beepin'! IMG_3146.JPG
    Final touches and connections before the bumper gets put on. IMG_3161.JPG
    It's a success! What a difference! My car just got sexier!!
    IMG_3165.JPG
    And finally side by side with sfv41901's bad nice person prius!
    IMG_3170.JPG
    IMG_3171.JPG
     
    Tracksyde, xliderider, ePrius and 6 others like this.
  19. ucsmfu

    ucsmfu Senior Member

    Joined:
    Sep 21, 2011
    1,498
    420
    0
    Location:
    canada
    Vehicle:
    2010 Prius
    Model:
    V
    2012 front bumper fits on the 2010 Prius ?
     
  20. sfv41901

    sfv41901 Masta S

    Joined:
    May 5, 2010
    4,591
    5,292
    0
    Location:
    Palmdale, Ca
    Vehicle:
    2015 Prius
    Model:
    Four
    Yes it does