1. Attachments are working again! Check out this thread for more details and to report any other bugs.

reset maintenance light

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by Conrad, Feb 14, 2013.

  1. Conrad

    Conrad Junior Member

    Joined:
    May 16, 2011
    23
    1
    0
    Location:
    Santa Clarita, CA
    Vehicle:
    2005 Prius
    Model:
    Three
    How does one reset the light on a 2012 Plug in?
    On the 2005 it was simple, thanks conrad
     
    #1 Conrad, Feb 14, 2013
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    there is a recent thread on this, and it's in the manual. sorry, it's too complicated for me to remember. something about the go button, the km/miles button, etc., etc.
     
    #2 bisco, Feb 14, 2013
  3. Conrad

    Conrad Junior Member

    Joined:
    May 16, 2011
    23
    1
    0
    Location:
    Santa Clarita, CA
    Vehicle:
    2005 Prius
    Model:
    Three
    Wow, that was a big help. I didn't think it would be in the manual because it wasn't in my 2005. I assumed they want to keep you on the hook every 5k miles. I'll check the manual as soon as the wife comes home with the car. Thanks, conrad.
    I couldn't find the thread as I'm not to good navigating forums
     
    #3 Conrad, Feb 15, 2013
  4. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,340
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    To reset Maint light for Gen III:
    1) Set display to Trip A
    2) Turn car off
    3) While holding down MPH/KPH button press Power button with foot on brake
    4) Display will show time to completion
    5) When complete release MPH/KPH button and Maint function is reset until the next 4500 miles
     
    #4 jdcollins5, Feb 15, 2013
    owlegrad, lensovet, Hi Burrito! and 1 other person like this.
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    thanks for bailing me out jd!:)
     
    #5 bisco, Feb 15, 2013
    jdcollins5 likes this.
  6. Conrad

    Conrad Junior Member

    Joined:
    May 16, 2011
    23
    1
    0
    Location:
    Santa Clarita, CA
    Vehicle:
    2005 Prius
    Model:
    Three
    Thanks for the effort but my wife has the car at work right now. Are those instructions for the Prius 'Plug In'?
     
    #6 Conrad, Feb 15, 2013
  7. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,340
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    They should be.
     
    #7 jdcollins5, Feb 15, 2013
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i just tried it, it worked perfectly. a little time bar shows the progress until completion, it was only a second or two. step 1 should probably be: put foot on brake, press power button, but i guess they are assuming if you are looking at the message, the car is already on. thanks jd!:)
     
    #8 bisco, Feb 15, 2013
  9. owlegrad

    owlegrad New Member

    Joined:
    Sep 28, 2016
    1
    1
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    IV
    Very helpful, thanks!
     
    #9 owlegrad, Sep 28, 2016
    jdcollins5 likes this.
(You must log in or sign up to post here.)