1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Tight idler pulley bolt

Discussion in 'Gen 2 Prius Technical Discussion' started by Conrad, Feb 13, 2013.

  1. Conrad

    Conrad Junior Member

    Joined:
    May 16, 2011
    23
    1
    0
    Location:
    Santa Clarita, CA
    Vehicle:
    2005 Prius
    Model:
    Three
    The bolt thru my idler pulley is so tight that I'm afraid I will break it trying to loosen it.
    Is that bolt a left hand thread by any chance? Thanks a bunch, conrad
     
    #1 Conrad, Feb 13, 2013
  2. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,817
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Is this the bolt that goes through the center of the idler pulley or the long brass tensioner bolt?
    If the center bolt it may be reverse so normal rotation does not unscrew it. Not at home and can't get to files.
     
    #2 edthefox5, Feb 13, 2013
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    No, it is not left hand thread. Use a cheater bar if necessary to provide sufficient torque. Tightening torque is 30 ft.-lb.
     
    #3 Patrick Wong, Feb 13, 2013
  4. Conrad

    Conrad Junior Member

    Joined:
    May 16, 2011
    23
    1
    0
    Location:
    Santa Clarita, CA
    Vehicle:
    2005 Prius
    Model:
    Three
    Thanks a bunch was very informative. I'll try it tomorrow.
     
    #4 Conrad, Feb 14, 2013
(You must log in or sign up to post here.)