CONFIRMED: OBDII Toyota Code Reader under $40 on eBay

Thanks for the information! I see $29.99 with free shipping but they are coming from China.

As I see, one end connects to the car OBDII port and the other end to the computer USB port.

 

who was the seller? I see many Mini-vci cables on e-bay which one did you get?
I have bought this one MVCI Toyota Lexus Scion TIS Techstream V7.10.030 OE Diagnostic Interface | eBay but it will not work on my 2003 Prius but will work on my 2010

 

Do these $40 cables include the software by any chance? Or how to I get my hands on the software? Total newb to all of this..

 

Any answer about the software? Can I use a cable like this to turn off the reverse beep?

 

did u get the answer to the reverse beep...if not this may help
can't give proper credit as I don't remember where I found it.
Prius Beeper disable
To eliminate the beeps from seatbelts and reverse, follow these steps:

1. Power on the car to IG-ON or READY. IG-ON will do for this purpose.​

2. Using the Trip/ODO button, set the Trip/ODO display to ODO (not Trip A or Trip B)​

3. Power off the car.​

4. Now power the car to READY (brake on). This is required so that step 6 works correctly.​

5. Within 6 seconds of powering on, press and hold the Trip/ODO button for 10 seconds or more (there is no indication... just count)​

6. WHILE STILL HOLDING ODO *after* the 10 seconds, shift the "gear" selector to R, then press the P button. Now release the Trip/ODO button.​

7. If the last step was successful, "b on" or "b off" should be displayed in the location where the Trip Odometer or Odometer is normally displayed (front dash area). "b on" is beep on (default), and "b off" is beep off.​

8. Press Trip/ODO to toggle the mode.​

9. Now power the car off to exit the toggle mode.​

10. Power the car on to READY and confirm the reverse beep status by shifting to R. The beep should not be audible if "b off" was selected, and should be audible if "b on" was selected..​

Note: The Repair manual page states that if the the 12v battery is disconnected, the beep will reset to the default of on, and this procedure will need to be performed again - I have confirmed this to be true!. The repair manual also is not clear that Trip/ODO should remain depressed while shifting.​

Additional Note: The driver and passenger seatbelt reminder chime can be disabled or enabled (respectively, defaults are driver on and passenger off) using similar steps. Instead of shifting from P to R to P in step 6, simply buckle then unbuckle the appropriate seatbelt while continuing to depress the Trip/ODO button. Might want a helper for this one!​

 

This didn't work for me.